This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
764 ELECTRONIC SHEET METAL MICROMETERS (WITH OUTPUT)
0-1"/0-25MM
This micrometer is the same as our 222 Micrometer, except that it has an electronic readout and is available in the 1" (25mm) and 25mm ranges. Rounded anvil gives a point contact for more accurate gaging; flat anvil also available.
READABILITY FEATURES • Large, right-sized,
high-contrast LCD digital
readout is easy to read and reduces errors • Resolution: .00005" and 0.001mm
• Conventional inch or millimeter graduations standard
• Attractive no-glare black wrinkle finish on the frame
764 Electronic Sheet Metal Micrometers, 6" Throat Depth with Standard Inch Graduations on Shell and Thimble
764M Electronic Sheet Metal Micrometers, 150mm Throat Depth with Standard Millimeter Graduations on Shell and Thimble 764MEAXFL 66446 0-25mm/0-1" Range, Round Anvil Cable Information for 764 and 764M Electronic Sheet Metal Micrometers Part No. EDP Description PT61963 66636 Computer Interface Cable Complete to PC (RS232C) 733SCKB 69888 Computer cable to PC 733SCU 69898 Cable to computer running SPC Data Collection Software 733SCM 69893 Connection to 7612 or 7613 Multiplexier Packed one in a box without case.
• Starrett no-glare satin chrome finish on thimble and sleeve
ACCURACY AND LONG-LIFE FEATURES
• One 3-volt battery furnished for over a year of normal usage
• Automatic OFF after 30 minutes of nonuse
FULL-FUNCTION ACTION FEATURES • Instant inch/millimeter conversion
• "ME" millimeter model will turn on in the millimeter mode after installation of a new battery
• Measurement HOLD button • Ability to zero tool at any position
• Ability to retain and return to the true zero reading of the micrometer
• PRESET button to position
install any reading at any
• Ability to install minimum and maximum limits • RS232 data output port • Works well with Starrett DataSure®
Collection Systems
Key to Starrett Micrometer Numbering System Prefixes R S T V
Reverse Reading Micrometer Set .0001" Reading
0.001mm or 0.002mm Reading, as specified
Suffixes F L
Friction Thimble Lock Nut
M Metric N P R S
Non-Rotating Plain
Ratchet Stop Speeder
TN Threaded Hub and Check Nut W/SLC Standard Letter of Certification X Z
ZZ
Micro-lapped Carbide Measuring Faces With Case Case Only
Wireless Data
Check out our website for interactive features at starrett.com