This content requires Adobe Flash Player version
or later.
Either you do not have Adobe Flash Player installed,
or your version is too old,
or there is a problem with your Flash installation and we were unable to detect it.
Large, easy-to-view /understand display shows the diameter of a hole or boss
Altissimo includes many routines including diameter of a bore (1 and 2), width of a slot or a rib (3 and 4), distance from datum to center of a hole or slot and distance between features
Hole Diameter Measurement
Inside Width Measurement
Display showing TIR
TIR mode can measure the high or low point of a diameter or other surface. The datum can then be set to the max or min value.
Interactive LCD with unique scanning meter for easy probe position viewing
Specifications: Measuring Range Resolution Accuracy
Repeatability Power Source Included
Accessories Dimensions Weight
Perpendicularity
24"/600mm (Extendible to 30"/750mm by rotating the probe holder 180º) .0001"/.0005"/.001" (0.002mm/0.01mm/0.02mm) ±.0003" (0.008mm) ±.0002" (±0.002mm)