Sheet Metal Snips
TINNER’S SHEARS
Straight pattern tinner’s shears. Designed to cut straight, as well as wide curves to the left or right. Drop forged of high carbon steel, induction hardened cutting edges. Cushion-grip handle.
CAT. NO. MFG. NO. DESCRIPTION 1X458
DA70030 1X459 DA70040
12” Tinners Shears with a 3” cut Cutting capacity: 20 gauge CR - 22 gauge SS
14” Tinners Shears with a 3-5/8” cut Cutting capacity: 18 gauge CR - 22 gauge SS
EACH $36.20
$54.04
ANDY™ ALUMINUM HANDLED SNIPS
Sleek styling, easy blade replacement and larger handles make the “Andy™” Snips more versatile. The slimnose is ideal for making cuts in tight material, shapes such as J-Channel, and new extended blade tips reach all the way into corners. A full cutting length makes straight shearing with the Malco Andy™ Snip fast and easy. Enhanced blade edges are precision ground and surface finished for smooth cutting in all types of applications. The wider, thicker loops are 1/2” longer for added comfort and provide up to 10% more input leverage.
AVIATION SNIPS
Hardened alloy steel blades offer maximum cutting edge life. Su- perior material flow and lower profile allows maximum maneuver- ability. Fast adjusting, long life pivot bolt and nylon locking nut with pressure washer holds desired adjustment even for repetitive use in heavy gauge metal.
Comfortable ergonomic handle design maximizes natural power stroke range of an average size hand and allows a more efficient full length cut. Multi-operational latch is accessible from right, left or top and is friendly to right or left hand users.
CAT. NO. DESCRIPTION 1X1070 1X1071 1X1073
Aviation Snip, cuts left - red grip Aviation Snip, cuts right - green grip Aviation Snip, cuts straight - yellow grip
EACH $47.22 $47.22 $47.22
OFFSET AVIATION SNIPS
The serrated upper jaw of these snips offers solid gripping power with less burr. Ground tips on jaws allows access in tight area’s so that Max Offsets can easily make nickel size blind hole cuts.
CAT. NO. DESCRIPTION 1X1074
1X1074A
Offset Aviation, cuts left & straight Offset Aviation, cuts right & straight
EACH $59.75 $59.75
BULLDOG AVIATION SNIP UPRIGHT SNIPS
Designed for notching and trimming. Ideal for cutting multiple layers of “S” cleaters. Riveted handles, extra long life compression spring and steel handle shaft extends through full length of grip.
CAT. NO. DESCRIPTION 1X1072
Bulldog Aviation Snip, cuts left
EACH $48.84
REPLACEMENT SPRINGS CAT. NO. DESCRIPTION
1X487 Replacement Spring for 1R, 3R, 5R
CAT. NO. DESCRIPTION 1X1072S
Replacement Spring for MAX2000
Right angle blades make cutting easier in tight spac- es and overhead. Capacity to cut 24 ga. cold-rolled sheet metal and 28 ga. stainless steel sheet metal.
CAT. NO. DESCRIPTION 1X443 1X437
EACH $4.59
EACH $3.67
Upright Snip, right cut Upright Snip, left cut
EACH $38.27 $38.27
CAT. NO. MFG. NO. LENGTH OF CUT OVERALL LENGTH EACH 1X1330 1X460
M-12N M-14N
8G0617 3” 3-1/2”
M14NRB M12NRB
12” 14”
CAT. NO. MFG. NO. DESCRIPTION 1X466
Replacement Blade Set Replacement Blade Set
EACH $54.13 $24.10
$55.99 $72.82
AVIATION SNIPS
Blades are hot drop-forged of moly alloy steel and scientifically heat- treated to provide a strong, longer
lasting cutting edge. Forged blades are superior to investment cast blades and stamped blades are a minimum requirement of U.S. Government Specifications and ANSI/ASME Standards. Blades are serrated an optimum 40 serrations per inch to grip material being cut without making large “teeth marks” on cut edge of mate- rial. Full length cut from pinch-to-point per cutting stroke meeting all ANSI/ASME Compression Test Standards. These snips will cut up to 18 gauge cold rolled sheet steel.
CAT. NO. DESCRIPTION 1X486 1X489 1X448 1X445 1X446
Aviation Snips, left cutting Aviation Snips, right cutting
Aviation Snips, combination left, right straight cutting Offset Aviation Snip, left cutting Offset Aviation Snip, right cutting
EACH $32.17 $30.18 $39.25 $39.08 $39.08
Visit us at www.remichel.com
991
TOOLS & TEST INSTRUMENTS