Pipe Thread Sealants

PIPE JOINT COMPOUND

The well-known thick black paste for sealing threaded connections in lines carrying water, steam, fuel oils, kerosene, gasoline, natural and propane gas, and most common industrial fluids to temperatures of 400°F. Applies over grease or oil film. Supplied in handy brush-top container.

CAT. NO. MFG. NO. DESCRIPTION EACH 1M400 1M401

30556 30557

1/4 pt.can 1 pt can

$9.05 $15.61 GASKET SEALANT 1 & 2

Solvent-based, paste-like sealers used as a gasket dressing or coating and as a sealant for threaded connections. Recommended for all common industrial fluids to temperature of 400°F.

Loctite® Gasket Sealant 1 dries fast and sets hard for sealing permanent or rigid assemblies.

Loctite® Gasket Sealant 2 dries slowly to a pli- able film best suited for semi-permanent or non- rigid, flexible assemblies.

CAT. NO. MFG. NO. DESCRIPTION CARTON QUANTITY EACH 1M404 1M408

1B 2B

3 oz. tube 3 oz. tube

12 12

$8.77 $8.61

COPPER LOCK

This product requires no soldering to bond copper to fittings. NO SWEAT SOLDERING. Simply apply a small bead of Copper Lock to the

THREAD SEAL TAPE

3-Wrap Teflon Tape ensures a leak proof seal in temperatures ranging from -450 degrees F to +550 degrees F. 1M481 is a CSA approved Full Density thread sealing tape designed specifically for gas lines, color-coded yellow for easy identification. 1M482 is a full density thread sealing tape designed to seal lines carrying steam, water, air sewage, chemicals, and other fluids, color-coded red. 1M480 & 1M484 are standard density thread sealing tapes used for all applications except gas and oxygen lines.

CAT. NO. MFG. NO. DESCRIPTION 1M480 1M481 1M482 1M484

70200 70820 70797 70196

EACH

1/2” x 520” Roll-White $2.67 1/2” x 260” Roll- Yellow $5.29 1/2” x 540” Roll-Red

$6.13 3/4” x 520” Roll-White $2.34 PIPE-DRI®

Aerosol insulation which provides a moisture barrier to stop sweating an dripping on refrigeration lines, air conditioning lines and other cold surfaces.

CAT. NO. MFG. NO. DESCRIPTION EACH 1R441

4297-75 18 oz. can $24.53 Visit us at www.remichel.com 615 OIL IN ONE™ CUTTING OIL

Oil in One is a coolant, lubricant and hydrau- lic oil. It prolongs machine life and maintains tools, dies and chasers at their clean-cutting best by providing superior full circumference lubrication with an absolute minimum build- up of heat.

CAT. NO. MFG. NO. DESCRIPTION EACH 1M450 1M454

45-635 45-645

1 qt. jug 1 gal. jug

$21.22 $49.09

fitting and insert copper. The bonding agent sets up in seconds and seals permanently in 5 minutes. With stands temperatures from -60 to 300° F, and pressures up to 500 PSI. Recommended for: Acid, air, alkalines, brine, caustics, gasoline, kerosene, LP gases, oil, refrigerants, solvents, steam and water.

CAT. NO. MFG. NO. DESCRIPTION 7K945

10-800 EACH 2 oz. Squeeze Bottle $26.63 PVC RAIN-R-SHINE® BLUE

Medium-bodied blue colored cement for PVC pipe and fittings. Up to 6” diameter. Very fast set- ting cement formulated for wet conditions and/or quick pressurization and fast installation.

Recommended for ALL grades and types of PVC pipe and fittings, potable water, pressure pipe, gas conduit, DWV, Schedule 40 and Schedule 80.

CAT. NO. DESCRIPTION EACH 3K203B

8 oz. can $13.07

CPVC/PVC CEMENT, CLEANER, PRIMER & GLUE

CAT. NO. DESCRIPTION 3K204 3K203 3K207

PVC Cement

3K204A 3K204C 3K205

3K205A 3K210 3K206 3K211

SIZE EACH 4 oz. $7.69

PVC Cement, Winter Grade 16 oz. $11.42 CPVC Cement

8 oz. $10.04

PVC, CPVC, ABS Cement 4 oz. $5.56 PVC,CPVC, ABS Cement 16 oz. $12.68 PVC,CPVC, ABS Cleaner 8 oz. $7.12 PVC,CPVC, ABS Cleaner 16 oz. $9.59 PVC Primer - Purple

4 oz. $4.72

PVC/CPVC Primer - Purple 8 oz. $7.74 CPVC Glue - Orange

4 oz. $6.10

CHEMICALS