FOUNDATION VENT FAN Eliminator®

6H119

The Eliminator Foundation Vent Fan is a motorized fan designed for circulation of outside air through the crawl space of a structure to reduce moisture problems. Moisture causes dry rot and fungus growth and increases the potential for termite infestation. With the Eliminator, air changes are increased dramatically for better moisture removal and control.

It is designed to be mounted to a new or existing crawl space vent. It operates off a temperature switch which activates the motor at or above 50%F. An adjustable de-humidistat (20% - 80%) is used to operate the unit at varying levels of relative humidity.

Thermostat included. One unit required per 1000 square feet of crawl space. 115V, 60 amps, 135 CFM. Mounting plate dimension: 14-3/8” x 6-7/8” with 6’ power cord.

6H118

CAT. NO. MFG. NO. DESCRIPTION 6H119 6H118

46264901 42681500

EACH Eliminator Vent Fan De-Humidistat (optional)

$150.11 $48.16

PVG Series POWER VENTER

The PVG Series indoor mounted power venter comes complete with all of the required controls for normal furnace application of sidewall venting. On a call for heat the burner circuit is closed and the burner starts. After the thermostat is satisfied, the burner shuts down and the post purge control continues venter operation to clear residual combustion gases. An accessory vent hood is required for sidewall termination (6H176 or 6H177).

CAT. NO. MFG. NO. DIAMETER 100,000 BTU/HR 145,000 BTU/HR 220,000 BTU/HR 310,000 BTU/HR EACH 6H213 --- ---

PVG-300 4” --- ---

5” 6”

305’ --- ---

145’ 247’ 334’

Note: Maximum Equivalent Horizontal Pipe Length in Feet. 64’

100’ 147’

---

54’ 74’

$460.02

Visit us at www.remichel.com

895

AIR HANDLING & VENTING PRODUCTS