Valves IN-LINE VALVES
This flare connection valve is recommended for use on fuel oil. The body is forged brass. Has a Buna-”N” material O-ring for stem packing. Ideal for installation in oil line. When handle
is straight with valve, the valve, the valve is open. When handle is turned 1/4” turn (perpendicular to valve), the valve is off.
CAT. NO. 2K008A 2K008
SIZE
3/8” OD Flare x 3/8” OD Flare 3/8” OD Flare x 3/8” MPT
EACH $36.07 $47.65
FUSIBLE MACHINED BRASS VALVES
Designed to close automatically when temperature reaches 165°. For use on fuel oil or Kerosene.
IN-LINE FLARE VALVES
These ball valves are one piece, easy opening valves rated for water, oil and gas. AGA approved. CAT. NO.
SIZE
2K005 2K006
3/8” OD Flare x 3/8” OD Flare 1/2” OD Flare x 1/2” OD Flare
EACH $21.13 $23.78
CAT. NO. MFG. NO. SIZE 2K247 2K248 2K119 2K125 2K249 2K126 2K127
B-105-F B-100-F B-50-F
B-205-F B-200-F B-300-F B-400-F
3/8” O.D.Flare x 3/8” O.D. Flare In-Line Valve 3/8” FPT x 3/8” FPT 1/4” FPT x 1/4” FPT 1/2” Flare x 1/2” Flare 1/2” FPT x 1/2” FPT 3/4” FPT x 3/4” FPT 1” FPT x 1” FPT
Line Valve Line Valve
Check Valve Check Valve Check Valve Check Valve
CAT. NO. MFG. NO. DESCRIPTION
2K253 HW-165 Replacement Hand Wheel for Fusible Valves Above, 165° F.
DESCRIPTION EACH $47.28 $34.97 $28.32 $41.55 $84.79
$155.61 $455.78
EACH $4.83
OIL TANK VALVES
A compact, low cost flare to male pipe 45° oil tank valve. Brass body construction. 2K014 has a special 3-1/2” extension into the tank to avoid drawing water and sludge from the tank bottom. Flare nut not included.
CAT. NO. 2K001 2K014 2K106
SIZE 1/2” MPT x 3/8” OD Flare
1/2” MPT, w/3-1/2 ext. x 3/8” OD Flare 1/2” MPT x 3/8” MFL
EACH $27.56 $45.36 $29.34
CAT. NO. MFG. NO. 2K004 2K122 2K123
2K004L 2K124
2K004N 2K121
B-104-CF B-104-CFS B-204-CF
MACHINED BRASS ANGLE BURNER VALVES
SIZE 3/8” Flare x 1/4” MPT
3/8” Flare x 1/4” MPT short extension 1/2” Flare x 1/4” MPT
3/8” Compression x 1/4” MPT
EACH $38.99 $29.95 $39.60
B-104-CFXL 3/8” Flare x w/extra long 1/4” MPT extension $47.40 B-204-CFXL 1/2” Flare x w/extra long 1/4” MPT extension $50.05 B-104-F
B-104-FLX
3/8” Compression x 1/4” MPTw/extra long 1/4” MPT extension
OIL FILTER VALVES
This is a 90° turn ball valve for 100% positive shut-off.
The 90 degree angle is the perfect answer when a filter is to be mounted at a tank. The filter screws directly onto a 3/8” M.P.T. thread.
CAT. NO. MFG. NO. DESCRIPTION 2K012
111-205 1/2” MPT x 3/8” MPT - 1 pc. body
EACH $33.16
BOTTOM BRONZE
CAT. NO. MFG. NO. SIZE 2K110
TANK/FILTER VALVES 141TF
EACH 1/2” MPT x 3/8” MPT $50.22
BRONZE STRAIGHT TANK/FILTER VALVES
CAT. NO. MFG. NO. SIZE 2K112
131TF EACH 3/8” MPT x 3/8” MPT $49.55
SLUDGE BYPASS VALVE CAT. NO.
SIZE 4G8561 1/2” NPT x 3/8” NPT
EACH $51.50
CAT. NO. MFG. NO. 2K245 2K246 2K114 2K115 2K116 2K117 2K118
MACHINED BRASS CHECK VALVES SIZE
B-105-HCV B-205-HCV B-50-HCV B-100-HCV B-200-HCV B-105-CV B-205-CV
3/8” Flare x 3/8” Flare 1/2” Flare x 1/2” Flare 1/4” FPT x 1/4” FPT 3/8” FPT x 3/8” FPT 1/2” FPT x 1/2” FPT 3/8” Flare x 3/8” Flare 1/2” Flare x 1/2” Flare
$31.42 $40.63
EACH $37.84 $39.78 $28.81 $26.24 $60.31 $31.99 $33.63
NOTE : “CV” refers to hard seat; “HCV” refers to soft seat.
494
VALVES, PIPE & FITTINGS