Hardware TAPER POINT SCREWS
Taper point screws with 1/4” hex head drive. Completely painted white for use installing registers and grilles.
CAT. NO. MFG. NO. SIZE 8G0430 TPW250-8x2 #8 x 2” pack of 250 EACH DRYWALL SCREWS
Drywall screws with taper point and phillips head drive. CAT. NO. MFG. NO. SIZE
EACH 4X037 1030-100 #8 x 2-1/2”
SLOTTED ROUND HEAD MACHINE BOLTS Made of steel, zinc plated.
CAT. NO. MFG. NO. DESCRIPTION 6E586
6021
Assortment Pack, sizes .6-32, .8-32 and .10-32 in 1/2” and 1-1/2” lengths
EACH $5.61
7106X
PLASTIC ANCHORS WITH SCREWS
NOTE: All screws are slotted pan head sheet metal type, zinc plated.
CAT. NO. MFG. NO. DESCRIPTION 6E807
6E568
CAT. NO. MFG. NO. 1K926
1K926A
LAG BOLTS SIZE
E-150S3/8x2 E-150S3/8x3
3/8” x 2” 3/8” x 3”
6E808
EACH $2.67 $2.64
6E566
6E810 6E809
6E567 STOVE BOLTS
Combination of round head machine screws and finished hex nuts.
Both screw and nut are made of zinc plated steel. Quantity listed is equal number of nuts & bolts.
CAT. NO. MFG. NO. SIZE 6E750 6E751 6E752 6E753 6E754 6E755 6E756 6E757 6E758 6E759
6401 6402 6403 6404 6411 6412 6413 6414 6415 6416
3/16 - 24 3/16 - 24 3/16 - 24 3/16 - 24 1/4 - 20 1/4 - 20 1/4 - 20 1/4 - 20 1/4 - 20 1/4 - 20
LENGTH PKG.QTY. EACH 1/2” 3/4” 1”
1-1/2” 1/2” 3/4” 1”
1-1/2” 2”
2-1/2”
46 42 37 30 25 22 20 17 14 12
$6.05 $6.05 $6.05 $6.05 $4.72 $6.05 $6.05 $6.05 $6.05 $6.05
ANCHOR KITS TOGGLE BOLTS
Slotted, round head machine screws with spring wings. Zinc plated steel.
CAT. NO. MFG. NO. SIZE PKG. QTY.
6E581 6E582 6E583
7033 7034
7036X
3/16” 6 1/4” 5 3/8” 4
EACH 4X006
$5.65 $6.14
$10.10 4X030 9072 9093
Easy to use anchor kit for sheet rock, cinderblock, masonry and concrete. Uses a plastic anchor engineered for use with a sheet metal screw. Kit is designed for anchoring lightweight fixtures. Each kit consists of anchors, screws and drill bit in handy reusable plastic box.
CAT. NO. MFG. NO. DESCRIPTION 4X005
9030
40, 6-8-10-12 x 1” lip anchors, 40, 10 x 1” combo. sheet metal screws, 1-1/4” masonry drill”
100, 10-12 x 1” conical anchors, 100, 10 x 1-1/4” hex. sheet metal screws,1-1/4” masonry drill
100, 4-6-8 x 1” super anchors, 100, 8 x 1” combo. sheet metal screws, 1-3/16” masonry drill
EACH $6.90
$9.59 $10.85 6E565 6E569
Green Anchor Kit, #10 x 1 screws and 1/4” drill bit (qty. 25)
7106CX Green Anchor Kit, #10 x 1 screws and anchors (qty. 100) with a 1/4” drill bit
7111X
Blue Anchor Kit, #14 x 1 screws and a 5/16” drill bit (qty. 25)
7111CX Blue Anchor Kit, #14 x 1 screws and anchors (qty. 100) with a 5/16” drill bit
7124CX Orange Flange Anchors (qty. 100)
7124RX Orange Flange Anchor Kit, #10 x 1 screws and a 1/4” drill bit (qty. 25)
7103CX Blue Flange Anchor Kit, #4 x 3/4” screws and anchors (qty. 100) with a 5/32” drill bit and plastic box
7101CX Yellow Flange Anchor Kit, #8 x 1 screws and anchors (qty. 100) with a 3/16” drill bit and plastic box
7102CX Red Flange Anchor Kit, #10 x 1-1/4” screws and anchors (qty. 100) with a 1/4” drill bit and plastic box
EACH $11.08
$21.18 $18.64 $35.95
$12.10 $12.90
$10.19 $11.30 $17.53
CAT. NO. MFG. NO. SIZE 6E764 6E765 6E766 6E767 6E768 6E769 6E770 6E771 6E571 6E572
6601 6602 6603 6621 6622 6623 6642 6643 6644 6684
1/4 - 20 1/4 - 20 1/4 - 20 5/16 - 18 5/16 - 18 5/16 - 18 3/8 - 16 3/8 - 16 3/8 - 16 1/2 - 13
LENGTH PKG.QTY. EACH 3/4” 1”
1-1/2” 3/4” 1”
1-1/2” 1”
1-1/2” 2”
2-1/2”
34 30 21 21 19 13 13 10 7 4
$6.05 $6.05 $6.05 $6.05 $6.05 $6.05 $6.05 $6.05 $4.72 $6.05
HEX HEAD CAP BOLTS
These Hex Head Cap Screws are made of low carbon, grade 2 steel and are zinc plated. USS classification. Total thread length equals 2 x diameter + 1/4”.
Visit us at www.remichel.com
985
TOOLS & TEST INSTRUMENTS