Refrigeration System Products

SUCTION ACCUMULATORS

Designed to protect the compressor from liquid re- turn. The suction line may trap/accumulate quanti- ties of liquid which are suddenly dumped on the compressor as it starts up, resulting in compressor failure. Proper use of a suction line accumulator installed in the suction line, prior to the compres- sor will eliminate this possibility. Vertical accumu- lators feature copper nipples and fusible plug.

4G9304 HP3702 4G8589 HP3703 3R617 3R618

3703 3738

3700 3706

4G9305 HP3738 3R619 3R620

CAT. NO. MFG. NO. TONNAGE RANGE 1/4 to 2 1/4 to 2 1/4 to 2 1/4 to 3 1/4 to 3 1 to 4 1 to 4 1 to 9

3R615 3R616

3701 3702

2 to 17 SUCT.

LINE SIZE 5/8” I.D. 5/8” I.D. 5/8” I.D. 3/4” I.D. 3/4” I.D. 7/8” I.D. 7/8” I.D.

DIMENSIONS LENGTH x DIA. 6-5/8 x 4” 10-5/8 x 4” 10-5/8 x 4” 10-5/8 x 4” 10-5/8 x 4” 13 x 5” 13 x 5”

1-1/8” I.D. 15 x 6” 1-3/8” I.D. 20-1/4 x 6” WEIGHT EACH 3 lbs $83.00

4-1/2 lbs $104.68 4-1/2 lbs $136.87 4-1/2 lbs

5-1/4 lbs $104.46 7-3/4 lbs $139.27 8 lbs

13 lbs 17 lbs

$207.97 $187.35 $250.35

DISCHARGE MUFFLER RECEIVER

Designed to store liquid refrigerant on systems utilizing TXV’s. this is a vertical receiver with 430F fusible plug.

CAT. NO. MFG. NO. CONNECTION SAE PUMP DOWN DIMENSIONS DIA. x LENGTH 5” x 10”

10R3455 1918 1/4” 6 lbs

Designed to reduce pulsation and vibration of refrigerant thru the discharge line. The discharge muffler smoothes out the pulsation and reduces the associated noise in the space.

CAT. NO. MFG. NO. CONNECTION OD MAX TONS DIMENSIONS DIA. x LENGTH 2” x 7-7/16”

10R3478 M5 5/8” 5 EACH $67.18

3R602 3R603 3R604 3R605 3R606 3R607

H75

H100 H150 H200 H300 H500

3/4 1

1-1/2 2 3 5

HEAT EXCHANGERS

Designed to provide a maximum of heat transfer efficiency with a minimum of pressure drop. They are conservatively rated in horse- power and therefore easy to select for a particular application.

Installation is simplified as connections are of proper size to match suction and liquid lines of standard units. Installation is neat as fit- tings are in the end caps and lines remain parallel.

CAT. NO. MFG. NO. HP

SUCTION LINE 5/8” 5/8” 7/8” 7/8”

1-1/8” 1-1/8”

LIQUID LINE 1/4” 3/8” 3/8” 3/8” 3/8” 1/2”

SHELL DIA. 2” 2” 2” 3” 3” 5”

OVERALL LENGTH 12-1/8” 13-1/8” 17-3/8” 13-1/4” 15-1/4” 14-3/8”

EACH

$158.96 $186.48 $230.55 $293.22 $351.39 $416.39

ANGLE CHARGING & PURGING VALVES

Designed for installation in branch or run of solder type tee to provide convenient system access for charging and purging. Compact design forged brass body. Cap and chain included. Rated up to 700 psi.

CAT. NO. MFG. NO. INLET SOLDER INLET MPT OUTLET FLARE EACH 1R963 1R964 1R965 1R966 1R969 1R970 1R971 1R972 1R973 1R974 1R976 1R977 1R978

617A-4S4 1/4” OD 617A-6S4 3/8” OD 617A-6S6 3/8” OD 617A-8S4 1/2” OD 617A-10S6 5/8” OD 600A-4B 600A-4C 600A-6B 600A-6C 605-6D 605-8C 605-8D

--- --- --- --- --- --- ---

606B-10D ---

--- --- --- --- ---

1/4” 3/8” 1/4” 3/8” 1/2” 3/8” 1/2” 1/2”

1/4” 1/4” 3/8” 1/4” 3/8” 1/4” 1/4” 3/8” 3/8” 3/8” 1/2” 1/2” 5/8”

$56.48 $55.44 $54.54 $64.19 $86.97 $41.37 $52.03 $39.33 $38.19 $66.93 $49.27 $58.19

3R580 3R581 3R582 3R583 3R584 3R585

VIBRATION ABSORBERS

Eliminates vibration and dampens noise on air condition- ing and refrigeration equipment. Constructed of seamless, heavy duty metal hose covered with a high tensile bronze braid. Each unit is pressure tested, thoroughly cleaned and highly polished. They are electronically dehydrated, ends sealed with plastic caps and individually boxed. UL listed.

CAT. NO. SIZE

OVERALL LENGTH

1/4” OD 7-1/2” 3/8” OD 8-1/4” 1/2” OD 9”

5/8” OD 9-3/4” 3/4” OD 11-1/4” 7/8” OD 11-1/2”

EACH

$25.19 $22.86 $25.94 $26.24 $24.59 $40.36

CAT. NO. SIZE

3R586 3R587 3R588 3R589 3R590

OVERALL LENGTH

1-1/8” OD 13”

1-3/8” OD 14-3/4” 1-5/8” OD 17” 2-1/8” OD 20” 2-5/8” OD 24”

EACH

$48.89 $70.51

$101.00 $152.69 $240.64

700

REFRIGERATION EQUIPMENT & SUPPLIES