WATER SIREN PLUS™

• Normally Open/Normally Closed Alarm Contact Output that closes (or opens) when water is detected • 90 decibel alarm when water is detected • Unit can sound for up to 36 hours on a fresh 9V battery • Low battery alarm chirps to remind you to change the battery • Can be floor or wall mounted and sensor extended to the area where water is a concern • 6’ (1.8m) sensor wire allows sensor to be placed in hard to reach areas • High impact plastic makes this unit durable for years of reliable use

Sounds an alarm and an auxiliary alarm contact output! The WaterSiren Plus is an affordable solution to alerting you quickly of water leaks and it can close (or open) an alarm contact which can trigger an alarm system or a telephone dialer such as our Deluxe FreezeA- larm. Unit operates on one 9 volt battery (not included)

FA-B-CAA FA-I-CAA

FREEZE ALARM™ FA-B-CCA (Basic) • FA-I-CCA (Intermediate) • FA-D2 (Deluxe)

Monitor temperature and electrical power or refrigeration, heating and air conditioning equipment for you buildings, homes and cabins. Remote temperature monitoring can be easy using our QuickStatus Feature that gives you the current temperature, power status and back-up battery voltage in a simple 15 second phone call. Available on our Intermediate and Deluxe FreezeAlarm’s.

Now you can have a nice warm cabin waiting for you before you arrive! Our Telephone Controlled Thermostat feature gives you the ability to turn on, up or down the heat and air conditioning with a phone call. Some installation with your existing thermostats and heating system is required for this feature. This feature is only available on our Deluxe FreezeAlarm. Add a water sensor to our Deluxe FreezeAlarm model to get protection for more than just temperature and power failures.

HUMIDITY & TEMPERATURE CONTROLLERS

TC-110S-24 & HC-110S-24

Digital humidity controllers for applications including building management, computer rooms, HVAC, food service, medical, agricultural and industrial equipment. Features membrane touch- pad programming, 0.56” high red LED display, programmable set point(s) and differential(s), tamper proof operation with high and low set point limits, panel mount enclosure and 1 SPDT 4A relay (24VAC resistance).

TEMPERATURE ALARM LOGGER TAL-2000D-24

This product can be used for applications including refrigeration, computer rooms,

HVAC, food service, building management, medical, agricultural and industrial equipment. It provides accurate temperature display with audible and visual alarm warnings.

HUMIDITY & TEMPERATURE INDICATORS

TI-100-24, TI-300-24 & HI-100-24

Provide accurate temperature/humidity display for panel/flush mount applications. The TI-300 is an excellent digital replacement for round mechanical indicators. Features panel mount enclosure, scratch resistant lens and 0.56” high LED display. Power require- ments: 24VAC, 24 VDC, 2VA.

Features membrane touch pad programming, dual programmable alarm set points for both high and low temperature. Logs highest and lowest temperature since last reset. Fits in standard 2” x 4” junction box. Additional features include automatic alarm reset, back-up battery and field calibration mode. NSF approved, 0.56” high red LED display. Power requirements: 24VAC.

The Control Products shown on this page are NOT STOCKED at R.E. Michel Locations but are available as a special order. Please contact your local Branch or Sales Representative for more information.

831

CONTROLS