“ZD” SERIES PARALLEL BLADE DAMPERS
• Simple two wire installation • Reliable spring return motor • Fail safe normally open operation • Fewer blades for quiet operation
• Extruded aluminum frame & blades • Solid construction • Low leakage
The new “ZD” Series of dampers are designed for performance and economy. These new dampers offer unparalleled performance in leakage and rigidity. The strong 24 volt spring return motor insures worry free operation for years to come. Its simple two wire design makes it easy to wire. The power close, spring return open feature insure fail safe operation.
ZD dampers are ordered by dimension 1 by dimension 2. Motor is always mounted on dimension 2 side. Example: a ZD 10 x 8” is a 10” W x 8” H damper with the motor on the 8” side. A ZD 8 x 10” is a 8”W x 10”H damper with the motor mounted on the 10” side. Larger sizes are available.
CAT. NO.
1C201 1C202 1C203 1C204 1C205 1C206 1C207 1C208 1C209 1C210
SIZE (W x H)
8 x 8”
10 x 8” 12 x 8” 14 x 8” 16 x 8” 18 x 8” 20 x 8” 22 x 8” 24 x 8” 26 x 8”
EACH
$277.81 $280.00 $291.35 $295.90 $299.26 $304.88 $309.36 $316.17 $322.97 $344.45
CAT. NO.
1C211 1C260 1C219 1C220 1C221 1C222 1C223 1C224 1C225 1C226
SIZE (W x H)
28 x 8” 8 x 10”
10 x 10” 12 x 10” 14 x 10” 16 x 10” 18 x 10” 20 x 10” 22 x 10” 24 x 10”
EACH
$352.31 $280.00 $295.90 $304.88 $311.67 $320.66 $327.44 $334.28 $352.31 $350.07
CAT. NO.
1C227 1C228 1C261 1C279 1C240 1C241 1C242 1C243 1C244 1C262
SIZE (W x H)
26 x 10” 28 x 10” 8 x 12”
10 x 12” 12 x 12” 14 x 12” 16 x 12” 18 x 12” 20 x 12” 8 x 14”
EACH
$371.61 $382.76 $291.35 $304.93 $304.84 $320.66 $327.54 $336.45 $342.10 $295.90
CAT. NO.
1C280 1C263 1C281 1C264 1C282 1C265 1C283 1C266 1C285
SIZE (W x H)
10 x 14” 8 x 16”
10 x 16” 8 x 18”
10 x 18” 8 x 20”
10 x 20” 8 x 24”
10 x 24” EACH
$358.82 $299.26 $320.71 $304.88 $327.54 $309.36 $334.28 $411.40 $350.07
CAT. NO. MFG. NO. 1C1227 1C1069
ACTUATOR MOTORS USED WITH:
M847D1012 ZD & ARD Dampers MSTN
FPC FREEZE PROTECTION CONTROL
This two wire temperature sensor is designed to easily clip on to the suction line and monitor suction line temperature. The FPC opens at 36°F +/- and when wired in the Y leg, will cycle the compressor off to control capacity in supply-to-
return by-pass applications. The FPC closes at 46°F +/-, making the Y leg and cycling the compressor back on.
CAT. NO. MFG. NO. EACH 1C1060 FPC
$90.42 AT72D 40VA TRANSFORMER
24 volt transformer provides low voltage power source for operating up to 5 actua- tor motors. Use additional transformer for each additional 5 motors on system.
CAT. NO. MFG. NO. 1C901
AT72D1683
EACH $39.93
Obsolete AOBD Dampers (old style)
EACH
$144.21 $205.02
SPC STATIC PRESSURE CONTROL
The SPC is used to sense the supply air static pressure and control a modulating by-pass damper, MOBD/MARD, to maintain a set system static pressure as zone dampers open and close. The SPC has a range of 0.1” to 4.0”W.C., with a fixed differential.
CAT. NO. MFG. NO. EACH 1C1059 SPC
$438.05 SDCR SLAVE DAMPER CONTROL RELAY
When 2, 3, or 4 dampers are to be con- trolled simultaneously by a single switch or thermostat, the SDCR control provides a wiring panel and 4PDT plug in relays to simplify wiring and control of dampers.
CAT. NO. MFG. NO. EACH 1C1065 SDCR
$262.07 Visit us at www.remichel.com 325
INDOOR AIR QUALITY