COMMERCIAL OIL BURNER
MODEL CF1400 4.00 to 13.60 GPH Firing Rate
COMMERCIAL OIL BURNER MODEL CF2300A
7.00 to 19.00 GPH Firing Rate
The CF1400 3450 RPM burner features extremely quiet operation and positive pressure firing over 1.0” W.C., and delivers a clean, steady, intense flame that will remain stable under the most adverse draft conditions. Ideal for commercial and industrial applications with a requirement for 560,000 to 1,900,000 BTUH input and a fir- ing rate range from 4.00 to 13.60 gph. Typical applications include factories, warehouses, hospitals, schools, office buildings and dormitories. The CF1400 is rust and corrosion resistant for use in harsh environments; all components are readily accessible for ser- vice and maintenance. For use with #1 and #2 fuel oils; Suntec H series, two-stage fuel pump is standard equipment. Primary control, cad cell and delayed oil valve are factory installed and pre-wired. 120v AC operation, 6.5 amps. This is a single stage burner only. High/low firing and additional air tube/ electrode combinations are available upon special order. CAT. NO. MFG. NO. DESCRIPTION
EACH 4H328 BCF101
CF1400 Chassis w/R7184B (pre-purge) primary control, solid-state igniter, Suntec 2/S “B” pump and solenoid valve
$3,472.50
The CF2300A is a 3450 RPM burner engineered to meet the rigor- ous demands of modern high-efficiency industrial and commercial oil-fired equipment. It is the ideal choice for applications with a requirement of 980,000 through 2,780,000 BTUH and a firing rate range of 7.00 to 19.90 gph. Typical installations include furnaces and boilers in military installations, bus and rail stations, factories, shopping malls, supermarkets and museums. The CF3200A is a remarkably compact design, lighter in weight than nearly all com- petitive unit. For use with #1 or #2 fuel oils; each burner is factory fired and tested. High/low fire sequencing with single nozzle operation assures less maintenance and fewer parts replacements. 120v AC operation, 12.2 amps. Order burner chassis, air tube/elec- trode assembly and mount separately.
CAT. NO. MFG. NO. DESCRIPTION 4H334
EACH
BCF304 CF2300A Lo/Hi Chassis w/R7184B (pre-purge) primary control, solid-state igniter, Suntec 2/S “B” pump and solenoid valve
$3,976.82
CAT. NO. MFG. NO. FIRING RATE GPH LENGTH EACH 4H329
AIR TUBE COMBINATION CF102KD
4.00 to 11.00 gph 10-1/4”
CAT. NO. MFG. NO. DESCRIPTION 4H331 4H332
51312 51193
Pedestal
ACCESSORIES Pressure Firing Flange
$314.19
CAT. NO. MFG. NO. FIRING RATE GPH LENGTH EACH 4H335
AIR TUBE COMBINATION CF103KG
7.00 to 19.00 10-1/4” EACH
$147.46 $75.80
CAT. NO. MFG. NO. DESCRIPTION 4H336 4H332
51313 51193
Pedestal
ACCESSORIES Pressure Firing Flange
$367.93
EACH
$142.19 $75.80
PROFESSIONAL SERVICEMAN’S GUIDE TO OIL HEAT SAVINGS
A fully illustrated, 58 page manual designed to further professional knowledge of heat energy con- servation options, their applications, criteria for installation, and appropriate installation procedures. An evaluation format is also included which is designed to serve as the basic toward the development of a comprehensive oil dealer energy conservation program. This manual is a must for both service managers and service technicians involved in oil heating service work.
CAT. NO. MFG. NO. DESCRIPTION 4H499
6380 Beckett Oil Heat Guide
EACH $4.47
Visit us at www.remichel.com
541
FUEL OIL SYSTEMS