UltraCap™ HIGH PRESSURE
CONNECTOR ASSEMBLIES
The SEC99A UltraCap Armored Capillary is designed for use as a pressure connection in refrigeration and air-conditioning applica- tions. High pressure connectors offer the strength of brass and the flexibility of copper capillaries. Eliminates breakage due to vibra- tion, greatly reduces installation or replacement time. Connections are 1/4” female flare with Schrader depressors.
CAT. NO. MFG. NO. 3R544H 3R546 3R547
SEC99AB-24C 24” SEC99AB-36C 36” SEC99AB-48C 48”
LENGTH EACH $35.41 $41.24 $47.07
P145 Series LUBE OIL
CUTOUT CONTROL
This is a line voltage control with 120 sec. time delay. Manual reset w/factory set range 6.5 psi with 1/4” MSAE fittings. It is de- signed to be an exact replacement for Copeland OEM 945NCA-12 and Ranco P30-5826. Can be connected with UltraCap™ Connec- tors.
CAT. NO. MFG. NO. 3R5195
P145NCA-12-C
HEATER CIRCUIT EACH 120/240 v AC
P270 Series SPST DUAL
PRESSURE CONTROL with UltraCap™ Connector
P270LB-1 - “All-range for R-12, R-22, R-500 and R-502. Auto- matic reset for high and low pressure; includes 24” UltraCap™ Connectors with 1/4” flare nut connection. Replaces Penn P70LB-1, Ranco 012-1549.
CAT. NO. MFG. NO. LOW
PRESSURE RANGE
LOW
PRESSURE DIFF.
3R540H P270LB 20” to 100 psi 5 psi± HIGH
PRESSURE RANGE
HIGH
PRESSURE DIFF.
100 to 425 psi 5 psi±
SPST DUAL P70 Series
PRESSURE CONTROLS
P70MA-1 - “All-range” for R-12, R-22, R500, R-502. 36” capillary tubes with 1/4” flare nut connectors. Replaces Ranco 012-4834.
P70LB-1 - “All-range” for R-12, R-22, R500, R-502. 36” capillary tubes with 1/4” flare nut connectors. Replaces Ranco 012-1549.
CAT. NO. MFG. NO. LOW
PRESSURE RANGE
3R526 3R540
* Under 300 psi/over 300 psi LOW
PRESSURE DIFF.
HIGH
PRESSURE RANGE
HIGH
PRESSURE DIFF.
P70MA-1C 20” to 100 psi 6 to 50 psi 100 to 425 psi Lockout P70LB-1 20” to 200 psi 6 to 50 psi 100 to 425 psi 55/65*
$282.21 $279.40
EACH $212.36 EACH $266.63
P70 Series SPST LOW
PRESSURE CONTROLS
P70AB-12 - Micro-set for R-12, R-22, R-500, R-502. Breaks circuit upon pressure fall; 36” capil- lary with 1/4” flare connection.
P70AB-1 - “All-range” for R-12, R-22, R-500 and R-502. Breaks circuit upon pressure fall; 1/4” male flare connection.
P70AB-2 - “All-range” for R-12, R-22, R-500, R-502. Breaks circuit upon pressure fall; 36” capillary with 1/4” flare connection.
P70CA-1 - “All-range” for R-12, R-22, R-500, R-502. Breaks circuit upon pressure fall; 36” capillary with 1/4” flare connection. Does not have cut-off knob adjustment.
CAT. NO. MFG. NO. 3R523 3R520 3R521 3R522
RANGE
P70AB-12C P70AB-1C P70AB-2C P70CA-1C
12” to 80 psi 20 to 100 psi 20 to 100 psi 20 to 100 psi
DIFFERENTIAL PSI EACH 5 to 35 adj. 6 to 50 adj. 6 to 50 adj. 6 to 50 adj.
$149.41 $157.00 $149.41 $161.34
P70 Series SPST HIGH
PRESSURE CONTROL
P70AA-400C high pressure control breaks a circuit upon pressure rise. 36” capillary with 1/4” flare nut connection.
CAT. NO. MFG. NO. RANGE 3R531
DIFFERENTIAL PSI
P70AA-400C 100 to 470 psi 35 to 200 EACH $132.60
P70 Series SPDT HIGH
PRESSURE CONTROLS
P70AA-118 - Head pressure fan cycling control. Makes circuit upon pressure rise; 36” capillary with 1/4” flare nut connector.
P70CA-3 - “All-range” for R-12, R-22, R-500 and R-502. Breaks circuit upon pressure rise; 36” capillary with 1/4” flare nut connec- tor.
P70DA-1 - “All-range” for R-12, R-22, R-500 and R-502. Breaks circuit upon pressure rise; 36” capillary with 1/4” flare nut connec- tor.
CAT. NO. MFG. NO. 3R530 3R532 3R524
RANGE
P70AA-118 P70CA-3
P70DA-1C
100 to 400 psi 50 to 450 psi 50 to 450 psi
DIFFERENTIAL PSI EACH 35 to 200 60 to 150
Man. Reset
$148.81 $165.86 $166.60
Visit us at www.remichel.com
771
CONTROLS