94 FORMULATIONS
Linseed Acid C D E
BiosControl® Excel 3231 ITC Bright
Butylene Glycol, Chlorophenesin, o-Cymen-5-ol
Aqua, Dextran, Origanum Vulgare Leaf Extract Parfum
0.50 1.00
1.00 0.15
Procedure Prepare Phase A under stirring at 70+/-2°C. Prepare Phase B under stirring at 70+/-2°C. Put Phase B into Phase A under mix and mix for 5 minutes. Cool down at room temperature and add Phase C, D and E. Properties Appearance: light cream pH: 5,5 – 6,5 Viscosity: 20000-25000 cP (s=4; 5 rpm)
SCHILL+SEILACHER Deo Roll-On “Fast Drying PHASE INGREDIENTS A B C
D E Polyfix ZRC 25 GP1 B
TRI-K Dual Action Youth Restoring Gel PHASE INGREDIENTS A Water
INCI NAME Water
Glycerin VERSENE™
Na2 Crystals1 VANZAN® Jeesperse®
NF-C2 ICE-T™ LB-TNS3 PECOSIL® G-6004
INCI NAME Aqua
Xanthan Gum Alcohol
Propylene Glycol Ethylhexylglycerin
Zinc Ricinoleate, Tetrasodium
Glutamate Diacetate, Propanediol Triethyl Citrate Citric Acid
% W/W 70.80 0.40
20.00 1.00 0.30 5.00
2.50 qs to pH: 6.8-8.0
Procedure Heat Part A up to 70 °C. Maintain temperature and add Part B while stirring Mix until preparation appears homogeneous Cool down to room temperature while stirring Add Part C. Add Part D in listed order. Adjust pH-value with Part E. Properties Appearance: colourless, clear, viscous liquid pH-value: 6.8 – 8.0 Suppliers 1 Schill+Seilacher GmbH
SEDERMA Illuminating eye contour fresh gel with AMBERSTEM™ SE0114G and HALOXYL™ SE0114G PHASE INGREDIENTS/INCI NAME
A Water Deionised (Aqua) Potassium Sorbate Sodium Sulfite Propanediol
B Phenoxyethanol
Cyamopsis Tetragonoloba (Guar) Gum Xanthan Gum
C
D E
F Tween™ 20 (Polysorbate 20)1
Tocopherol (and) Helianthus Annuus (Sunflower) Seed Oil Rosalla 264281 E4 Crodarom®
Green Caviar (Glycerin (and) Water (and) Caulerpa Lentillifera Extract)3 Haloxyl™ (Water (Aqua) (and) Glycerin (and) Steareth-20
(and) N-Hydroxysuccinimide (and) Chrysin (and) Palmitoyl Tripeptide-1 (and) Palmitoyl Tetrapeptide-7)2 Amberstem™ (Glycerin (and) Buddleja Davidii Leaf Cell Extract (and) Xanthan Gum)2
2.00 2.00
Procedure Weigh Part A and mix well. Weigh Part B and mix well. Add Part B to Part A with normal helix stirring, stir well. Weigh Part C and mix well. Pour Part C into Part A+B with rapid helix stirring. Add Part D into the previous part, mix well. Add Part E and mix well. Add Part F and mix well. Properties Appearance: Off-white semi viscous gel opaque; pH: 5.80± 0.5; Viscosity: 30.000 cps ± 10% Sp.93, 2.5rpm, 1 min, 25°C, Brookfield DV-I Prime Stability: 3 months at 4°C, 25°C, 40°C and 1 month at 50°C Centrifuge 10min @ 3000rpm and 1 x -80ºC/+25ºC 24 hours freeze-thaw cycle and autoclave 20min @120°C Suppliers 1 Croda 2 Sederma 3 Crodarom 4 Firmenich
PERSONAL CARE NORTH AMERICA
% W/W to 100 0.10 0.02 2.00 0.80 0.40 0.25 1.00 0.40 0.08 1.00
C XIAMETER®
PMX-0245 Cyclopentasiloxane5 Jeechem IPM NF3 Vitamin E Acetate6 GalMOL CCT7 Fision™
WrinkleFix6 Fision™
Instant Lift6 euxyl®
PE 90108
FD&C Red #40 (0.1% in H2O)
Glycerin Disodium EDTA Xanthan Gum Sodium Acrylate/Sodium Acryloyl
Dimethyl Taurate Copolymer, Cetyl Alcohol, Glycol Stearate, Glyceryl Stearate, Caprylic/Capric Triglyceride Isododecane, Vinyl Dimethicone/
Lauryl Dimethicone Crosspolymer, Dimethicone, Lauryl Dimethicone Cyclopentasiloxane
Isopropyl Myristate NF Tocopheryl Acetate
Caprylic/Capric Triglycerides Water, Hydrolyzed Rice Protein,
Hydrolyzed Pea Protein, Glycine, Proline, Hydrolyzed Sodium Hyaluronate Water, Acacia Senegal Gum, Hydrolyzed Soy
Phenoxyethanol, Ethylhexylglycerin FD&C Red #40
SI 8-101 % W/W 70.30 2.00 0.10
0.30 4.00
3.00 4.00
5.00 0.25 3.00 2.00
5.00
1.00 0.05
Procedure Add Phase A ingredients in given order while mixing. Add Phase B and mix well until uniform. Add Phase C and mix well until uniform. Increase mixing speeds as batch thickens. Properties pH: 5.54 Viscosity (Brookfield RV TD @2.5 rpm @25°C): 150,000 cps Suppliers 1 The Dow Chemical Company 2 R.T. Vanderbilt Holding Company 3 Jeen®
International Corporation 4 Phoenix Chemical, Inc.
5 Xiameter/nexeo™ solutions 6 TRI-K Industries, Inc. 7 Galaxy Surfactants, Ltd. 8 Schülke & Mayr GmbH
VARIATI Silky Touch Shampoo PHASE INGREDIENTS A
B C L 301
INCI NAME
Demineralized water Aqua Gluconolattone Glucovar 120 Perlastan®
Gluconolactone
Plantacare® 2000 UP2 Decyl Glucoside Sabosol PGO3 Avogelia® DS4
Profumo
D E
Acqua demin. Vari®
Silk P5 Preservatives Aqua Hydrolyzed Silk
Physiogenyl® PF Magnesium PCA, Manganese PCA, Sodium PCA, Zinc PCA
PEG-120 methyl gluocose dioleate Sodium lauroyl sarcosinate
09-TE-07-18 % W/W q.s. 1.5 2
Coco-Glucoside, Glyceryl Oleate Aqua, Sodium Cocoyl Amino Acids, Glycerin
12 10 2 5
0.2 2
0.5 1
q.s.
Procedure Combine ingredients of phase A, heating to 45-50°C. Combine ingredients of phase B, heating to 45-50°C. Add phase B to phase A. Combine ingredients of phase C. Add phase C to phase A+B. Combine ingredients of phase D. Add phase D to phase A+B+C. Add phase E. Add preservatives Properties pH: 5.0 – 5.5 Viscosity (Fungilab R3, rpm 30, 25°C): 1200 - 1400 mPa*s Suppliers 1 Schill + Seilacher 2 Basf 3 Sabo 4 Variati 5 Solabia
May 2020
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96
