66 FORMULATIONS
SEDERMA
FLAWLESS RADIANCE DAY CREAM WITH BB-BIONT™ AND CRYSTALIDE®
PHASE INGREDIENTS/ INCI NAME
A Water Deionised (Aqua) Sodium Benzoate Potassium Sorbate
B Glycerin
Xanthan Gum FFCS-PC (Xanthan Gum) Amigum (Sclerotium Gum)
C Crodamol™ GTCC (Caprylic/Capric Triglyceride)
Solaveil™ XT-300 (Titanium Dioxide (and) Caprylic / Capric Triglyceride (and) Polyhydroxystearic Acid (and) Stearic Acid (and) Alumina)
FSS Rice Stach Powder (Oryza Sativa (Rice) Starch) Span™ 60 (Sorbitan Stearate) Span™ 40 (Sorbitan Palmitate) Tocopherol
D Phytolea™ Pomegranate (Punica Granatum Seed Oil) Water Deionised (Aqua)
E Lactic Acid BB-Biont™
G Crystalide® H 35.36779 Hydramoi Ecocert SE0211D
SPLR % W/W to 100
0.30 0.30 4.00
6 0.40 4 0.25 1
7.00 1
7 1 1
3 5.00
2.00 1.80 1.20
0.20 1.00 1.50 0.15
2 1.00 3.00
5 0.20
Procedure: Weigh Part A, mix well with normal helix stirring. Weigh and mix Part B. Pour Part B into Part A with normal helix stirring for one hour. Heat Part A+B to 75°C in bain-marie. Weigh and heat Part C to 75°C in bain-marie. Weigh and add Part D to part C, stir well. Add Part C+D into Part A+B, with rapid rotor stator stirring. Weigh and add Part E to the previous part at around 45°C, mix well. Weigh and add Part F to the previous part, mix well. Weigh and add Part G, to the previous part, mix well. Weigh and add Part H, to the previous part, mix well. Properties: Appearance: White opaque cream; pH: 5.40 ± 0.5; Viscosity: 35.000 cps ± 10% Sp.93, 2.5rpm, 1 min, 25°C, Brookfield DV-I Prime Stability: 3 months at 4°C, 25°C, 45°C and 1 month at 50°C Centrifuge 10min @ 3000rpm and 1 x -80ºC/+25ºC 24 hours freeze-thaw cycle and autoclave 20min @120°C
Suppliers: 1. Croda 2. Sederma 3. Crodarom 4. Alban Muller 5. Iberchem 6. Jungbunzlaeur 7. Active concept Dow Corning® TRI-K
REPLENISH & TIGHTEN WATER-FACIAL CLEAR RINSE-OFF MASK PHASE INGREDIENTS
A Water
Pentylene Glycol BioPure™ GLDA
Sodium Alginate Glycerin B HyaClear® 7
INCI NAME Water
Pentylene Glycol Tetrasodium Glutamate Diacetate Sodium Alginate Glycerin
Water, 1,2-Hexanediol, Sodium Hyaluronate
Fision® Instant Lift Water, Hydrolyzed Soy Protein, Acacia Senegal Gum, Xanthan Gum
PERSONAL CARE January 2023 SI 11-69
SPLR % W/W 83.10 2.00
1 0.10 2.50 2.00 2 5.00 2 3.00 CE- 8411 Smooth Plus Dow Corning® G Betadet® HMW
2220 Non-Ionic Emulsion
S-20 Akypo® RLM 100
NaturePep® Teff TRIstat PCG 90
Citric Acid (10% Solution)
C Colorante- Naturel
Hydrolyzed Eragrostis Tef Seed Extract Phenoxyethanol, Caprylyl Glycol
Citric Acid Colorante- Naturel
2 1.00 2 1.00
0.20 3 0.10
Procedure: Add Sodium Alginate to water, mix well until completely hydrated. Premix Xanthan Gum with Glycerin and add it to Phase A. Add remaining ingredients of Phase A. Add Phase B ingredients while mixing. Add Phace C ingredients with slow mixing.
Suppliers: 1. Jarchem Industries Inc. 2. TRI-K Industries, Inc. 3. Siddha Medico-Color
UNIVAR RAW OCHRE CLAY PURIFYING HAIR MASK
PHASE INGREDIENTS A DI Water Kem EHG
INCI NAME Water (Aqua) Phenoxyethanol, Ethylhexylglycerin
Versene Na2 Crystals Disodium EDTA Glycerin
Aculyntm 88 Polymer Acrylates/Steareth-20 Methacrylate Crosspolymer
B AMP-Ultra® PC 2000 Aminomethyl Propanol C Methoceltm 40-0100 PCG
Xanthan Gum Personal Care grade vFFCSP
D 21010 Titanium Rhassoul
Dioxide Kaolin E Menthol Crystals
Premium Minerals SY153908
F Auxina Tricogena Hydroxypropyl Methylcellulose Xanthan Gum Titanium Dioxide Moroccan Lava Clay
OTS-2 Yellow LL-100P Iron oxides (and) CI 77492 (and) Triethoxycaprylylsilane
Kaolin Menthol Fragrance
Tussilago Farfara (Coltsfoot) Flower extract (and) Achillea Millefolium Extract (and) Cinchona Succirubra Bark Extract (and) Alcohol (and) Water
Bis-Isopropylamino-PG-Propyl Dimethicone/ Bis-Isobutyl PEG- 14 Copolymer (and) Polysorbate 20 (and) Butyloctanol
Divinyldimethicone / Dimethicone Copolymer (and) C12-C13 Pareth-23 (and) C12 Pareth-3
Lauryl Hydroxysultaine Laureth-11 Carboxylic Acid
FR1817 2
SPLR % W/W q.s.
1.2
0.25 5.0
3.3 0.46 0.4 0.6 2.0
15.0 1.6
5.0 0.05 0.56 8.0
2.0 0.5
4.0 2.5
Procedure: Mix A at RT until solubilized. Neutralize with B. Add C under high shear until homogeneous. Add powders of phase D, grinding the pigment under high shear until homogeneous. Warm menthol at 35°C until it melts into fragrance. Then add F under stirring. Add the 2 remaining surfactants of phase G slowly in order to avoid foam production Properties: Stability: Stable 2 months at 4°C, room temperature and 40°C pH= 6.45 Viscosity (spindle 7 ; 10 rpm ; 1 min) = 79 600 cPs Suppliers: 1. Univar
9. Hughes & Company 10. Kao Fragrances
2. Akema 3. Dow Personal Care 4. ANGUS® 5. Jungbunzlauer 6. Univar Colour 7. Logona 8. Daito Kasei 11. Vevy Europe 12. Dow Corning 13. Kao Chemicals Europe
www.personalcaremagazine.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68
