Page 94
www.us-tech.com
EVS Develops Cabinet for Solder Recovery System
Isle of Wight, UK — After receiving feedback from customers, EVS has enhanced its EVS 500LF by adding an integrated cabinet on which the sys- tem sits. The addition of the cabinet com- bines an automated dross chute with a compartment for the storage of recovered solder. The automated dross chute provides im proved perform- ance, as well as a sig- nificant reduction in dross handling for the operator. The EVS 500LF -
Cab is designed to ensure that the maxi- mum recovery of sol- der is maintained throughout the life of any wave solder sys- tem. Users can quickly recover up to 80 per- cent of pure solder with a higher ROI from the waste dross. EVS works to continu- ally improve the per- formance of its solder recovery units. The EVS 500LFCab is useful
remove small amounts of dross every hour; and customers who have mul- tiple waves with one EVS unit con- nected to each.
October, 2017
DEPRAG Intros Adaptive Fastening System
Lewisville, TX — DEPRAG has intro- duced its Adaptive DFS (DEPRAG fastening system). Engineered for flexibility, independent of material and fastener tolerances, or possi- ble layer gap, this system is designed to create a strong joint in a short amount of time. The Adaptive DFS uses an
EC-servo drive for feed stroke, instead of a pneumatic cylinder. This enables the system to auto- matically detect the point of pene- tration, regardless of tolerances and allowing force changes instantaneously. The process automatically
adjusts, resulting in an optimized cycle with high reliability, short cycle times, low material stress, and quick set up. Communication between
EVS 500LF solder recovery system. Contact: EVS International,
for a variety of customers, such as those with one lead wave and one lead-free wave; those who use nitro- gen or would like to reduce their nitrogen usage; customers with selective solder pots who only
Porchfield Business Park, Unit 2, Porchfield, Newport, Isle of Wight PO30 4QB, UK %+44-0-8451-30-47-33 E-mail:
sales@evsinternational.com Web:
www.solderrecovery.com
See at productronica, Hall A4 Booth 141
Is your test good enough?
the twin closed-loop systems allows automatic recognition of the penetration of sheet metal parts. The system continuously evaluates relevant actual values and automatically adjusts process vari- ables. The separate electronic regula- tion of stroke- and screw-drive offers wide-ranging parameter-setting pos- sibilities. Through controlled posi- tioning technology, it is possible to ensure exact positioning procedures and changeover points. Due to the regulated electric
drive of the stroke, any screw posi- tion can be accurately accessed. With underfloor (inverted) applications,
Deprag Adaptive DFS.
the fastener is done through a feed hose or by using a screw magazine. The cycle time is optimized by feed- ing one fastener, while driving another.
Contact: Deprag, Inc., 640
Hembry Street, Lewisville, TX 75057 % 800-433-7724 E-mail:
sales@depragusa.com Web:
www.depragusa.com
See at The ASSEMBLY Show, Booth 1931
Rogers: Laminates for
5G and Millimeter Wave Applications
Would you like to know the combined test coverage?
Ask about our FREE analysis offer
Will.webb@aster-technologies.com 719-264-7698
www.aster-technologies.com Contact Will Webb at:
Chandler, AZ — Rogers Corpor ation has introduced its series of CLTE- MW™ laminates. These laminates are ceramic-filled, woven-glass-rein- forced, PTFE composites. CLTE- MW laminates were developed to provide a cost-effective, high- performance material for circuit designers. This laminate system is useful for applications that have limitations in thickness, due to either physical or electri- cal constraints. Seven available thickness
options, from 3 to 10 mils (76 to 254 µm) provide signal-to- ground spacing for today’s 5G and other millimeter wave designs. A variety of copper foil options are available, including rolled, reverse-treated ED and standard ED. Resistive foil and metal plate options are also available upon request. CLTE-MW laminates are rein-
forced with spread glass, which, along with a high filler loading, help to minimize high-frequency glass weave effects on electromagnetic wave propagation. Their woven glass reinforcement also provides excellent dimensional stability. Other key fea- tures of the laminate include low z- axis CTE for excellent plated through-hole reliability, a low loss tangent of 0.0015 at 10 GHz and low moisture absorption of 0.03 percent. Thermal conductivity of 0.42
See at productronica, Hall A1 Booth 232
W/m-K enables heat dissipation in challenging designs along with a high dielectric strength of 630 V/mil to ensure z-axis insulation between
the fastener is held rigidly by the socket. Screwdriving time is short- ened, since only a very short stroke needs to be executed. The feeding of
CLTE-MW laminate.
conductor layers. The UL94 V-0 flammability rating allows the mate- rial to be used commercially. CLTE-MW laminates are
designed for a range of applications, including amplifiers, antennas,
baluns, couplers, and filters. Contact: Rogers Corp., 2225 W
Chandler Boulevard, Chandler, AZ 85224 % 480-917-6000 fax: 480-917-6049 E-mail:
sheryl.long@rogerscorp.com Web:
www.rogerscorp.com
See at productronica, Hall B3 Booth 401
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120 |
Page 121 |
Page 122 |
Page 123 |
Page 124
