July, 2017
www.us-tech.com
Elgin, IL — HARTING’s new Han® HP Direct connector hoods dispense with classic bulkhead mounted housing and replace it with two mounting flanges. The standard hoods form a seal directly on the switch cabi- net wall, saving space. To install, the mounting flanges are
screwed to the switch cabinet wall with the standard panel cutouts of the Han B housing series. One side of the contact inserts is secured to the mounting flanges, the other side is screwed into the hood. After mating, the hoods are attached to the mounting flanges by screw locking. Incorrect plugging is prevented by two coded elements on the side of the mounting flanges, as well as on the side with the hood. The company offers the hoods in
sizes that include 6, 10, 16, and 24B. All hoods are available with side or top entry in sizes M20, M25, M32, and M40. The connector hoods are avail- able in three versions: standard vari- ant for indoor industrial applications, with a gray powder surface and clas-
Pulse
Electronics Introduces NBASE-T ICMs
San Diego, CA — Pulse Electronics has developed a new series of multi- gigabit NBASE-T-compliant RJ45 integrated connector modules (ICMs) for 2.5GBASE-T and 5 GBASE-T applications. NBASE-T technology offers a cost-effective solution for boosting speed on existing Cat5e and Cat6 networks from 1 to 5 Gb for dis- tances up to 100m (328.1 ft). The company’s ICMs meet IEEE802.3bz specifications and are compatible with 100/1000BASE-T requirements. Pulse ICM designs contain
transformers, chokes and other elec- tronic components to eliminate com- mon mode noise, provide a high level of signal integrity and to reduce the risk of PHY damage due to high volt- age surge. The shielding incorporates EMI spring fingers, which act as a
EXPERIENCE assembly machines, technology and equipment hands-on with large exhibits and working equipment that you can interact with in-person.
UNCOVER new resources that may help expedite your time to market by discussing your toughest challenges with experienced and skilled manufacturing suppliers.
INTERACT with and gain solutions from product suppliers in every market from automotive to consumer products to medical and everything in between.
Ethernet integrated connector modules.
path of least resistance to electro- magnetic and radio frequency inter- ference (EMI/RFI) and help lower EMI emissions. The ICMs use through-hole
technology for wave soldering and are designed to withstand lead-free solder reflow temperatures up to 260°C (500°F). The ICMs are RoHS- compliant and UL approved. The parts are currently in high-volume production and ship in trays. They are available in single port (1 x 1), 4- port (1 x 4 and 2 x 2), 8-port (2 x 4), 12-port (2 x 6), and 16-port (2 x 8)
configurations. Contact: Pulse Electronics,
15255 Innovation Drive, San Diego, CA 92128 % 858-674-8226 E-mail:
mkhan@pulseelectronics.com Web:
www.pulseelectronics.com
MANUFACTURING SUCCESS
THE ROAD TO
GOLD SPONSOR
BRONZE SPONSORS
SILVER SPONSORS
PRODUCED BY
OCTOBER 24 – 26 2017 | ROSEMONT, IL
THEASSEMBLYSHOW.COM
Page 83 HARTING Intros Han HP Direct Connector Hoods
sic NBR seal; an EMC variant for applica- tions where a high degree of EMC protection is required with an electrically conductive surface and seal; and a version for outdoor applications with a back powder surface and UV- and ozone-resistant FKM seal. All variants come with IP protection
classes IP66, IP68 and IP69K in the mated state. The hoods are made of corrosion- resistant, die-cast aluminum. The housing system is mainly intended for the machin-
ery, robotics and energy areas. Contact: HARTING North America,
1370 Bowes Road, Elgin, IL 60123 % 847-717-9217
Han HP Direct connector hoods.
E-mail:
christina.chatfield@
harting.com Web:
www.harting.com
Register for FREE Today with USTECHVIP Code
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92