Non Slip Padded Underside 1 Nuvo™ Toilet Seat Raiser
Designed and developed by the award winning NRS Product Development Team. A low cost alternative to a 50mm (2") raised toilet seat. The Nuvo™ Nuvo™
as normal. The combined height of the Nuvo™
raised toilet seat fitted to the toilet bowl. The unique horseshoe profile is designed to fit the widest range of standard toilet seats/bowls. Adjustable cam locks allow for minor variations in the spacing of the standard toilet seat fixing bolts, ensuring a secure fit. Non-slip pads are included on the underside for added security. The Nuvo™
Toilet Seat Raiser is discreet, allowing the user to
retain use of their own toilet seat with the ability to raise and lower the seat and lid. In addition the full aperture of the standard toilet seat is maintained. As the Raiser remains in place, it also eliminates any risk of incorrect fitting associated with a 50mm (2") raised toilet seat that may be removed and refitted frequently. When no longer required, the Raiser can be easily removed and the standard seat refitted on its own. Manufactured in durable, moulded polyethylene, the toilet seat raiser may be cleaned using mild detergents or autoclaved on cycles up to 73˚C. Dimensions: Length: 400mm (15"). Width: 345mm (13"). Height: 25mm (1"). Code
Price M11119 Each 2 EXCLUSIVE DESIGN
Toilet Seat Raiser is an innovative, economical and inclusive solution to achieving a 50mm (2") raise for toileting. The Toilet Seat Raiser is simply located underneath and secured by the fixings of the existing toilet seat, which can then be used Toilet Seat Raiser and standard toilet seat is approximate to the height of a 50mm (2")
The clip-on seat will provide a 3" (75mm) raise to an existing seat, providing an overall raise of 4" (100mm). Easy to fit having no brackets, the Novelle can be fitted securely to the seat rather than the bowl, making it convenient and ideal for travel purposes. Simply squeeze together the open ‘horseshoe’ section, locate the front clip underneath the existing seat, push down and release the open section. To remove, simply reverse the process releasing the rear clip first. Can be autoclaved at 80°C. Dimensions: Height: 75mm (3"). Aperture: 275 x 240mm (11 x 91 Code