Air Bag System: 8B-125
21) Wash your hands with mild soap and water
afterward.
[A]
NOTE:
Remaining steps are to be followed in the
unlikely event that air bag (inflator) module
did not deploy or seat belt pretensioner did
not activate.
1
22) Ensure that deployment harness has been
disconnected from 12 volts vehicle battery and that
its two banana plugs have been shorted together by
fully seating one banana plug into the other.
1
23) Disconnect deployment harness and adapter cable
from air bag (inflator) module or seat belt
pretensioner.
2
24) Temporarily store undeployed air bag (inflator) [B]
module referring to “Precautions on Service and
Diagnosis of Air Bag System: ” for details.
25) Contact your local distributor for further assistance.
Deployment / Activation Inside of Vehicle
2
When the vehicle will be destroyed, or salvaged for
component parts, deploy the air bag modules and/or
activate seat belt pretensioners installed on vehicle. 1
NOTE:
If equipped with the seat belt pretensioners,
2
activate both side of seat belt pretensioners
at the same time when using special tool (C). [C]