Air Bag System: 8B-99
Step Action Yes No
2 1) With ignition switch OFF, disconnect SDM connector Substitute a known- DTC B1363: Repair
“L29”. good SDM and recheck. short from “RED/BLU”
2) Release shorting bar in SDM connector inserting release
or “YEL/BLK” wire
tool (1) included in special tool (A).
circuit to ground.
3) Measure resistance between “L29-18” and body ground,
DTC B1367: Repair
and between “L29-19” and body ground (for DTC
short from “BLU/RED”
B1363) or “L29-20” and body ground, and between “L29-
or “BLU/YEL” wire
21” and body ground (for DTC B1367) with connected
circuit to ground.
special tools (A), (B) and (C).
Special tool
(A): 09932–76010
(B): 09932–75010
(C): 09932–78310
"L29-18""L29-19""L29-20""L29-21"
"L17", "L41"
(A)
(C)
(A)
(B)
STEERING WHEEL
I4RS0A820098-
Is resistance infinity?
NOTE:
Upon completion of inspection and repair work, perform the following items.
• Reconnect all air bag system components, ensure all components are properly mounted.
• Clear DTCs referring to “DTC Clearance: ”, if any.
• Repeat “Air Bag Diagnostic System Check: ” to confirm that the trouble has been corrected.