7A-10 Heater and Ventilation:
Center Ventilation Louver Removal and Side Ventilation Louver Removal and
Installation Installation
S4RS0A7106014 S4RS0A7106015
Removal Right side ventilation louver
1) Disconnect negative (–) cable from battery.
2) Disable air bag system referring to “Disabling Air
Removal
Bag System: in Section 8B”.
1) Disconnect negative (–) cable from battery.
3) Remove passenger air bag module from instrument
2) Disable air bag system referring to “Disabling Air
panel referring to “Passenger Air Bag (Inflator)
Bag System: in Section 8B”.
Module Removal and Installation: in Section 8B”. 3) Remove steering column hole cover from instrument
4) Remove radio assembly from instrument panel
panel.
referring to “Radio Assembly Removal and 4) Remove combination meter cluster panel from
Installation: in Section 9C”. instrument panel, and then disconnect connector
5) Remove center ventilation louver (1) with garnish (2)
from front fog lamp switch of combination meter
from instrument panel, and then disconnect
cluster panel.
connector from hazard switch. 5) Separate right side ventilation louver (1) and
combination meter cluster (2).
NOTE:
Garnish is fitted to instrument panel with six
clips. When removing garnish from
1
instrument panel, be careful not to break
them.