8B-56 Air Bag System:
Step Action Yes No
3 1) With ignition switch OFF, disconnect special tools (B) Substitute a known- “YEL/RED” or “YEL/
and (C) from “L32” connector and SDM connector “L29” good SDM and recheck. GRN” circuit shorted to
from SDM respectively. ground in floor harness.
2) Release shorting bar in SDM connector inserting release
tool (1) included in special tool (A).
3) Measure resistance between “L29-4” terminal and body
ground and between “L29-5” terminal and body ground.
Special tool
(A): 09932-76010
(B): 09932-75010
(C): 09932–77320
"L29-4" "L29-5"
(A)
"L32"
(C)
DRIVER
PASSENGER
(B)
STEERING WHEEL
I4RS0A820024-
Is resistance infinity?
NOTE:
Upon completion of inspection and repair work, perform the following items.
• Reconnect all air bag system components and ensure all components are properly mounted.
• Clear DTCs referring to “DTC Clearance: ”, if any.
• Repeat “Air Bag Diagnostic System Check: ” to confirm that the trouble has been corrected.