8B-120 Air Bag System:
[A]
1
I4JA01822118-
6) Set air bag (inflator) module or seat belt pretensioner
as follows.
[B]
• For driver air bag (inflator) module
a. Clear space (3) on ground about 185 cm (6 ft)
in diameter where driver air bag (inflator)
module (1) is set for deployment. Paved,
outdoor location where there is no activity is
preferred. If outdoor location is not available,
use space on shop floor where there is no
activity and sufficient ventilation is provided.
Ensure no loose or flammable object exists
1
within deployment area.
b. Place driver air bag (inflator) module (1) with
its vinyl trim cover facing up (2) on ground in
step a.
2
3
I4RS0A820086-
[A]: Always carry air bag (inflator) module with trim cover (air bag opening)
away from body.
[B]: Always place air bag (inflator) module on workbench with trim cover (air
bag opening) up, away from loose objects.
2. Lower mounting bracket
3. Workbench vise
WARNING:
I3JA01820036-
• For handling and storage of seat belt • For passenger air bag (inflator) module
pretensioner, select place where ambient
a. Clear space (3) on ground about 185 cm (6 ft)
temperature is below 65 °C (150 °F),
in diameter where passenger air bag (inflator)
without high humidity and away from
module (1) is set for deployment. Paved,
electric noise.
outdoor location where there is no activity is
• Never carry seat belt pretensioner by preferred. If outdoor location is not available,
webbing. use space on shop floor where there is no
• When placing seat belt pretensioner on
activity and sufficient ventilation is provided.
workbench or other surface, be sure to lay
Ensure no loose or flammable object exists
it with its exhaust hole (1) side facing up. It
within deployment area.
is also prohibited to put something on seat b. Place deployment fixture (A) on ground in step
belt pretensioner. a.
Otherwise, personal injury may result.
Special tool