6C-1 Power Assisted Steering System:
Power Assisted Steering System
Precautions
Steering System Note • Take a note of DTC indicated on the SUZUKI scan
S4RS0A6300001
tool.
NOTE:
• Before inspection, be sure to read “Precautions for
All steering gear fasteners are important
Electrical Circuit Service: in Section 00” and
attaching parts in that they could affect the
understand what is written there.
performance of vital parts and systems, and/
or could result in major repair expense. They
• DTC C1122 (engine speed signal failure) is indicated
must be replaced with one of the same part
when ignition switch is at ON position and engine is
number or with an equivalent part if
not running, but it means there is nothing abnormal if
replacement becomes necessary. Do not use
indication changes to a normal one when engine is
a replacement part of lesser quality or
started.
substitute design. Torque values must be
• As DTC is stored in memory of the P/S control
used as specified during reassembly to
module, be sure to clear memory after repair by
assure proper retention of these parts.
performing the procedure described in “DTC
Clearance: ”.