Air Bag System: 8B-51
Step Action Yes No
2 1) With ignition switch OFF, disconnect “L32” connector Go to Step 3. “YEL/RED” circuit
located near the glove box. shorted to “YEL/GRN”
2) Check proper connection to floor harness connector at
circuit, “YEL/RED”
terminal “L32-3” and “L32-4”.
circuit or “YEL/GRN”
3) If OK, then connect special tools (B) and (C) to “L32”
circuit shorted to other
connector disconnected in Step 1).
circuit in instrument
panel harness.
Special tool
(B): 09932-75010
(C): 09932–77320
"L32"
(C)
DRIVER
PASSENGER
(B)
STEERING WHEEL
I4RS0A820022-
4) Check SDM DTC.
NOTE:
At this time, DTC B1031 may be output, but it is
not related to this check.