7B-31 Air Conditioning System:
4) Remove shims from shaft. Installation
5) Remove circlip (1) using special tool. 1) Install magnet clutch coil (2) fitting protrusion (4) of
Special tool
magnet clutch coil onto hole (5) of compressor (3).
(B): 09900–06107
2) Install new circlip (1) directing chamfer side (6)
downward.
(B)
Special tool
1
(B): 09900-06107
(B)
1
6
2
I4RS0A720040-
4
6) Remove magnet clutch pulley (2).
NOTE:
3
5
• If it is difficult to remove magnet clutch
pulley by hand, use puller (1).
I4RS0A720043-
• Do not damage magnet clutch pulley when
3) Apply silicon to contact face of thermal switch.
using puller.
4) Install magnet clutch lead wire clamp.