Air Bag System: 8B-105
Repair Instructions
Disabling Air Bag System
S4RS0A8206001
1) Turn steering wheel so that vehicle’s wheels (front
tires) are pointing straight ahead.
2) Disconnect negative (–) cable at battery.
3) Turn ignition switch to “LOCK” position and remove
key.
1
4) Remove “A/BAG” fuse from fuse box.
5) Pull out glove box while pushing its stopper from
both right and left sides and disconnect yellow
connector (1) for driver and passenger air bags as
a)
2
follows.
a) Release locking of lock slider (2).
b) After unlocked, disconnect connector.
b)
6) If equipped with side-air bag (inflator) module,
disconnect yellow connector of side-air bag (inflator)
module under front seat cushion (3).
a) Release locking of lock slider.
3
b) After unlocked, disconnect connector.
7) If equipped with side curtain-air bag (inflator)
module, remove quarter inner trim and disconnect a)
2
black connector (4) of side curtain-air bag (inflator)
module.
a) Unlock button (5).
b)
b) With lock button unlocked, disconnect connector.
5
a)
4
b)
I4RS0A820052-
NOTE:
With “A/BAG” fuse removed and ignition
switch ON, “AIR BAG” warning lamp will be
ON.
This is normal operation and does not
indicate air bag system malfunction.