Air Bag System: 8B-79
DTC B1063 / B1067: Driver / Passenger Side-Air Bag Initiator Circuit Short to Ground
S4RS0A8204074
Wiring Diagram
5 “L29”
“L25”
“L04”
4
1
GRN RED DS+
L29-11
WHT/RED
2
L29-26 IG
“G32” DS- L29-10
WHT/GRN
6
3
BLK
L29-27 E1
PS+ L29-12
GRY/BLU
[A]
8
“L29”
PS- L29-13
LT GRN/RED
7
“L30”
I4RS0A820031-
[A]: Shorting bar 3. “A/BAG” fuse 6. Driver side-air bag (inflator) module
1. From main fuse 4. Junction block assembly 7. Passenger side-air bag (inflator) module
2. Ignition switch 5. SDM 8. Ground for air bag system
CAUTION:
• Be sure to perform “Air Bag Diagnostic System Check: ” before starting diagnosis according to
flow.
• When measurement of resistance or voltage is required in this flow, use a tester along with a correct
terminal adapter from special tool (Connector test adapter kit).
• When a check for proper connection is required, refer to “Inspection of Intermittent and Poor
Connections: ”.
• If there is open circuit in the air bag wire harness, connector or terminal is found damaged, replace
the wire harness, connector and terminal as an assembly.