8B-12 Air Bag System:
DTC Diagnosis
Performance
) B1081
problem
) B1082
Communicatio
Driver side-
n error
) B1083
sensor
Short to ground
) B1084
Short to power
circuit or open
(A)
) B1085
Wrong
assembly
Performance
) B1091
problem
1
I4RS0A820008-
) B1092
Communicatio
Passenger
n error
) B1093
side-sensor
Short to ground DTC Clearance
S4RS0A8204006
) B1094
Short to power
circuit or open
1) Turn ignition switch to OFF position.
2) Connect SUZUKI scan tool to data link connector
) B1095
Wrong
assembly (DLC) (1) in the same manner as when making this
Resistance connection for DTC check.
) B1361
Driver side
high
Special tool
) B1362
B1363
curtain-air
Resistance low
(A): SUZUKI scan tool
)
bag circuit
Short to ground
) B1364
Short to power
circuit
Resistance
) B1365
Passenger high
) B1366 side curtain- Resistance low
) B1367 air bag Short to ground
circuit
) B1368
Short to power
circuit
(A)
DTC Check
S4RS0A8204005
1) Turn ignition switch to OFF position.
1
2) Connect SUZUKI scan tool to data link connector
I4RS0A820008-
(DLC) located on underside of instrument panel at
3) Turn ignition switch to ON position.
driver’s seat side. 4) Erase DTC according to instructions displayed on
Special tool
SUZUKI scan tool. Refer to SUZUKI scan tool
(A): SUZUKI scan tool
operator’s manual for further details.
5) After completing the clearance, perform “DTC
3) Turn ignition switch to ON position.
Check: ” and confirm that normal DTC (NO CODES)
4) Read DTC according to instructions displayed on is displayed and not malfunction DTC.
SUZUKI scan tool and print it or write it down. Refer
6) Turn ignition switch to OFF position and disconnect
to SUZUKI scan tool operator’s manual for further
SUZUKI scan tool from DLC.
details.
If communication between scan tool and SDM is not
NOTE:
possible, check if scan tool is communicable by
If DTC B1013, DTC B1021 or DTC B1027 is
connecting it to SDM in another vehicle. If
stored in SDM, it is not possible to clear DTC.
communication is possible in this case, scan tool is