Air Bag System: 8B-37
Step Action Yes No
2 1) With ignition switch OFF, disconnect “L32” connector Go to Step 3. “GRN” circuit or “YEL”
located near the glove box. circuit shorted to ground
2) Check proper connection to floor harness connector at
in instrument panel
terminal “L32-1” and “L32-2”.
harness.
3) If OK, then connect special tools (B) and (D) to “L32”
connector.
Special tool
(B): 09932–75010
(D): 09932–77320
"L32"
(D)
DRIVER
PASSENGER
(B)
BASE OF COLUMN
I4RS0A820015-
4) Check SDM DTC.
NOTE:
At this time, DTC B1041 may be output, but it is
not related to this check.