Power Assisted Steering System: 6C-34
7) Hold rack with soft jawed vise (3) and remove tie-rod
from rack (2).
I3RM0A630050-
5) Fasten boot with new band and clip securely.
Special tool
(A): 09943–55010
I4RS0A630033-
I3RM0A630051-
6) Install tie-rod end lock nut and tie-rod end to tie-rod.
Installation Position lock nut to marking (1) made in removal.
1) Install tie-rod (1) to rack (2).
NOTE:
2) Hold rack with soft jawed vise and tighten tie-rod to
specified torque.
When tie-rod was replaced, measure length
“a” on removed tie-rod and use it on new
Tightening torque replacement tie-rod so as to position lock nut
Tie-rod (a): 93 N·m (9.3 kg-m, 67.5 lb-ft) properly.