Seat Belts: 8A-4
Front Seat Belt Inspection
S4RS0A8106003
WARNING:
b
• Never attempt to disassemble or repair the
seat belt pretensioner (retractor
a
assembly). If any abnormality is found, be
3
sure to replace it with new one as an
assembly.
21
• Be sure to read “Precautions on Service
I2RH01810003-
and Diagnosis of Seat Belt: ”, before
5) Remove front seat belts from the vehicle.
starting to work and observe every
precaution during work. Neglecting them
Installation
may result in personal injury or
Install in reverse order of removal, noting the following.
unactivation of the seat belt pretensioner
• Seat belt anchor bolts should have an unified fine
when necessary.
thread (7/16-20 UNF). Under no circumstances
• Never measure resistance of pretensioner
should any different sized or metric screw threads be
or disassemble it. Otherwise, personal
used.
injury may result.
• Connect Yellow connector (1) to seat belt
pretensioner securely.
a. Connect connector.
b. Lock connector with lock slider (2).
2
1
I2RH01810004-
1
b) a)
I5RH01810002-
CAUTION:
• Enable air bag system. Refer to “Enabling Air Bag
System: in Section 8B”.
If seat belt pretensioner (retractor assembly)
was dropped from a height of 30 cm (1 ft) or
more, it should be replaced.