RF Electronics ♦ news digest with an antireflective film.


The sensor strip can also serve as a spectrometer. In this case, the UV light is first passed through a diffraction grating which splits the light into its various spectral components, like the colours of a rainbow. Each individual sensor detects a specific wavelength and provides information on the intensity of light at that wavelength.


This would be a good way of conducting ageing tests on the mercury lamps commonly used for water disinfection or UV curing. Does the lamp still emit light of the desired intensity throughout the entire spectrum, or are certain wavelengths weaker than they ought to be?


ZnO technology could revolutionise LEDs and UV lasers


To make lasers and LEDs both n-type and p-type materials are used. Researchers have claimed that shedding excess energy at the p-n junction is what produces light in both these types of devices


Scientists from North Carolina State University say they have solved a long-standing materials science problem.


They claim that it is possible to create new semiconductor devices using zinc oxide (ZnO).


The development could pave the way for efficient ultraviolet (UV) lasers and LED devices for use in sensors and drinking water treatment, as well as new ferromagnetic devices.


“The challenge of using ZnO to make these devices has stumped researchers for a long time, and we’ve developed a solution that uses some very common elements: nitrogen, hydrogen and oxygen,” says Lew Reynolds, co-author of a paper describing the research and a teaching associate professor of materials science and engineering at NC State.


“We’ve shown that it can be done, and how it can be done and that opens the door to a suite of new UV laser and LED technologies,” continues Judith Reynolds, a research scientist at NC State and lead author of the paper.


To make laser and LED technologies, you need both “n-type” materials and “p-type” materials. N-type materials contain an abundance of free electrons. P-type materials have “holes” that attract those free electrons.


But the holes in the p-type materials have a lower energy state, which means that electrons release their excess energy in the form of light as they travel from the n-type material to the p-type material.


The shedding of excess energy at the p-n junction is what produces light in lasers and LED devices.


Scientists have been interested in using ZnO to create these devices because ZnO produces UV light, and because it can be used to make devices with relatively fewer unwanted defects than other UV emitters. This means the resulting lasers or LEDs would be more energy efficient.


However, in the past, researchers have found it hard to consistently produce stable p-type materials out of ZnO.


Now the scientists at NC State say they have solved that problem by introducing a specific “defect complex,” using a unique set of growth and annealing procedures in the ZnO.


The table below shows conditions used for the research.


The defect complex looks different from a normal ZnO molecule. The zinc atom is missing and a nitrogen atom (attached to a hydrogen atom) substitutes for the oxygen atom. These defect complexes are dispersed throughout the ZnO material and serve as the “holes” that accept the electrons in p-type materials.


SIMS depth profiles of ZnO, H, and ZnN collected for June 2013 www.compoundsemiconductor.net 135


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96  |  Page 97  |  Page 98  |  Page 99  |  Page 100  |  Page 101  |  Page 102  |  Page 103  |  Page 104  |  Page 105  |  Page 106  |  Page 107  |  Page 108  |  Page 109  |  Page 110  |  Page 111  |  Page 112  |  Page 113  |  Page 114  |  Page 115  |  Page 116  |  Page 117  |  Page 118  |  Page 119  |  Page 120  |  Page 121  |  Page 122  |  Page 123  |  Page 124  |  Page 125  |  Page 126  |  Page 127  |  Page 128  |  Page 129  |  Page 130  |  Page 131  |  Page 132  |  Page 133  |  Page 134  |  Page 135  |  Page 136  |  Page 137  |  Page 138  |  Page 139  |  Page 140  |  Page 141  |  Page 142  |  Page 143  |  Page 144  |  Page 145  |  Page 146  |  Page 147  |  Page 148  |  Page 149  |  Page 150  |  Page 151  |  Page 152  |  Page 153  |  Page 154  |  Page 155  |  Page 156  |  Page 157  |  Page 158  |  Page 159  |  Page 160  |  Page 161  |  Page 162  |  Page 163  |  Page 164  |  Page 165  |  Page 166  |  Page 167  |  Page 168  |  Page 169  |  Page 170  |  Page 171  |  Page 172  |  Page 173  |  Page 174  |  Page 175  |  Page 176  |  Page 177  |  Page 178  |  Page 179  |  Page 180  |  Page 181  |  Page 182  |  Page 183  |  Page 184  |  Page 185  |  Page 186  |  Page 187  |  Page 188  |  Page 189  |  Page 190  |  Page 191