EQUIPMENT & ACCESSORIES CATALOG EDITION IV SPUTTER COATERS, SEM/TEM CARBON COATERS zzzQ150 GB Turbo-Pumped Sputter Coater/Carbon Coater — For Glove Box (continued) Other options, including FTM and glow discharge
• 3270 extended height chamber (87mm higher than the standard stage) For tall specimens.
• 3290 Film Thickness Monitor (FTM). Consists of a controller and quartz crystal oscillator built into the Q150 GB and a vacuum feed though, chamber mounted crystal holder and quartz crystal. As sputtered or evaporated material is deposited onto the crystal, so its frequency of oscillation is modified. This 'modification' is used to measure and control the thickness of material deposited.
• 4513 glow discharge insert. Used to modify surface properties (eg hydrophobic to hydrophilic conversion).
ORDERING INFORMATION Q150GB
A modular, high resolution turbomolecular-pumped sputter coater/carbon rod evaporator for glove boxes. Includes: sputtering insert, 54mm Ø x 0.3mm chromium target, carbon rod evaporation insert, carbon rods (3.05mm Ø x 300mm) and carbon rod shaper (manual operation). Fitted with a rotation stage
Rotary pump requirements (needs to be ordered separately) 91003
Edwards RV3 50L/s two-stage rotary pump, with vacuum hose, coupling kit and oil mist filter
91003-E 6550-A
Edwards RV3 50L/s two-stage rotary pump, with vacuum hose, coupling kit and oil mist filter, 220V
Diaphragm pump. A "dry" alternative to the standard 91003 oil-based rotary pump complete with vacuum hose, coupling kit and oil mist filter
Options and accessories 3230
3240 Carbon rod evaporation head insert (for 3.05mm Ø rods
Carbon rod evaporation head insert (for 6.15mm Ø rods).
Note that EMS recommends 3.05mm Ø rods as they offer greater process control and are more economical 3250 3260
Carbon fiber evaporation head insert Metal evaporation and aperture cleaning head insert,
including the ability to evaporate upwards or downwards. Supplied with a pack of ten tungsten filaments and a molybdenum boat.
3270 3290
Extended height vacuum chamber (214mm high – the standard chamber is 127mm high). For increased source to sample distance and for coating large specimens
Film thickness monitor (FTM) attachment.
3300 3320
4513
3600 3630
Consists of a built in chamber mounted quartz crystal oscillator (includes crystal). As sputtered or evaporated material is deposited onto the crystal, so its frequency of oscillation is modified. This 'modification' is used to measure and control the thickness of material deposited Spare quartz crystal.
Full range vacuum gauge for low and high vacuum measurement (a low vacuum Pirani gauge is fitted as standard)
Glow discharge insert to modify surface properties (eg hydrophobic to hydrophilic conversion) or to clean surface residues
Metal evaporation basket - pack of 10 (for use with metal evaporation head) Two-year spares kit for Q150 GB
Includes: chromium target, glass cylinder, carbon fiber cord, carbon fiber - fine, carbon rods 3.05mm, quartz crystals, O-rings
each each
each each
each 6802
each each
each each
Glow discharge attachment option
Specimen stages 6790-S
each
6800-S 6801
During sputtering, optional film thickness monitor (FTM) shown
Swinging arm stage drive, a stage drive and positioning mechanism which positions the stage under the correct target. Also provides rotation drive to the stage. Rotation Speed Max 38 rpm Min 14 rpm
Rotating specimen stage for 6" (152 mm) wafers, with rotation variable between preset limits.
Rotating 50 mm Ø specimen stage with adjustable tilt.
The platform has six specimen stub positions for 15 mm, 10 mm, 6.5 mm or 1/8" pin stubs.
The stage rotation speed is variable between preset limits. The target to stage height is variable between 0 mm and 42 mm for the standard stage. When used with the extended height cylinder the target to stage height would be an additional 87 mm. 50 mm Ø variable height specimen stage
with six stub positions for 15 mm, 10 mm, 6.5 mm disc stubs or 1/8" pin stubs. Stage rotation speed variable between preset limits.
Note: Target to stage height is variable between 10 mm and 53 mm for the standard stage. The stage is supplied with two mounting pillars; one provides 10 mm to 32 mm target to stage distance and the other 31 mm to 53 mm. An adjustable stop is used to set the height. When used with the extended height cylinder (optional accessory) the target to stage height would be an additional 87 mm. 6803
50 mm Ø rotary tilting stage.
A rotary planetary style stage with a variable tilt angle from horizontal to 30 degrees. The platform has six positions for either 6.5 mm, 10 mm and 15 mm disc stubs or 1/8" pin stubs. Rotation speed is variable between preset limits.
Note: depending upon specimen height, this stage may require the optional extended height cylinder. 6804
A 90 mm Ø specimen stage for glass each each
each each
each each
35
microscope slides (up to two 75 mm x 25 mm slides or a single 75 mm x 50 mm slide). The stage can alternatively accommodate up to six 1/8" SEM pin stubs. The stage rotation speed is variable between preset limits. A gear box is included to allow the optional FTM to be used.
For our complete selection of specimen stages, please see the Specimen Stage Selection Guide on page 49 >>>>
each
each each
each
each
each
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76
