Page 82
www.us-tech.com
July, 2014
B&K Precision Intros Multi Range DC Power Supplies
Yorba Linda, CA —B&K Precision has expanded its 9115 Series with the addition of two new multi-range pro- grammable DC power supplies, mod- els 9115-AT and 9116. Like the 9115, the new models deliver full output power of 1200W in any combination of voltage and current within the rated limits and continue to offer the same features, but with a few notable differ- ences. The 9115-AT provides special built-in automotive test functions and the 9116 offers a higher voltage range up to 150V, making these new models suitable for automotive as well as a vari- ety of benchtop or ATE sys- tem applications. The 9115-AT’s special built-in
¸ RoHS
automotive test functions can simu- late common test conditions to ensure reliability of electrical and electronic devices installed in automobiles. Compliant with automotive standards DIN 40839 and ISO 16750-2, these power test waveforms include: motor startup simulation, short voltage drop, reset behavior voltage drop, and engine start routine with cranking. Front panel features from the 9115 carry over to the 9115-AT and 9116, which include a high resolution VFD display, independent voltage and cur- rent control knobs, cursors, and a numerical keypad for direct data
entry. Both new models also provide internal memory storage to save and recall up to 100 different instrument settings, sequence (list mode) pro- gramming, and configurable overvolt- age and overpower protection limits. On the rear are standard USBTMC- compliant USB, RS-232, GPIB, and RS-485 interfaces supporting SCPI commands.
Rack-mountable versatile power supply. For easy programming and
remote control, the 9115 Series now offers remote control software for front panel emulation, generation and execution of test sequences, and logging measurements using a PC. The application software can also be integrated with NI’s Data Dashboard for LabVIEW app (available for Android or iOS), allowing users to create custom dashboards on smart- phones and tablets for additional
monitoring functions. Contact: B&K Precision
Corporation, 22820 Savi Ranch
Parkway, Yorba Linda, CA 92887 % 714-921-9095 fax: 714-921-6422 Web:
www.bkprecision.com
Storage Solutions Sovella: Tool
Canton, GA — Sovella has expanded on the Perfo-Stor™ line of tool stor- age systems to offer a broad range of practical and versatile solutions for tool storage. The Perfo-Stor product line includes perforated panels, which can be attached to the compa- ny’s slotted uprights or directly to a wall, as well as industrial screening, and over 75 varieties of hooks and tool holders. The company’s most popular tool storage solution is the TKT Tool Storage Unit. These free- standing units hold up to 10 perforat- ed panels, allowing for hundreds of square feet of tool storage on only 21 square feet of floor space. There is a caster on the lower edge of each panel, making them easy to move. Each perforated panel is able to hold 220 pounds of tools and equipment, with a maximum of 2200 pounds per TKT Storage Unit.
Tools can be stored using the
company’s large selection of hooks and tool holders. Sovella tool storage
Tool storage system.
products are designed to touch on all 5 of the 5S philosophies: Sort, Set in Order, Shine, Standardize, and Sustain.
Contact: Sovella USA, 156
Bluffs Court, Canton, GA 30114 %770-424-0004 Web:
www.sovella.us
Sterling, MA — Anderson Power Products® has added a 5-Position connector to the Mini SPEC Pak fam- ily. This environmentally sealed and touch-safe connector houses up to 5 contact positions in a compact latch- ing shell. Power handling capabilities up to
Anderson Power Adds More Mini Connectors
available for design flexibility.
23A and 600VAC/DC per pole allow more power in a smaller waterproof (IP68) shell than competing solutions. An unusual and easy-to-assemble back shell design enables the 5 Position Mini PL to accommodate up to 12 AWG (2.5mm2) wires while maintain- ing the compact size. Gold plated con- tacts down to 24 AWG (0.252) are suit- able for power or signal needs. Optional sequencing capabilities are
5-Position Mini SPEC Pak connector.
Contact: Anderson Power
Products, 13 Pratts Junction Rd., Sterling, MA 01564-2305 % 978-422- 3600 fax: 978-422-3700 Web:
www.andersonpower.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96