May, 2016 Continued from previous page
The use of four nozzles gives the cus- tomer flexible coating options. Also available is the new RDS
UV, a compact UV dryer that can be integrated into any production envi- ronment. Depending on the material requirements, the UV curing system is available with medium-pressure mercury lamps or UV-LED lamps and ensures reliable drying of UV- cured coatings. Today’s electronics are now
used in many industries, which requires components to function with 100 percent reliability under all tem- perature conditions. To analyze the stability of electronics under extreme temperatures, Rehm has developed a
www.us-
tech.com Get Started with Equipment from Rehm
RDS Magazine Dryer As part of the HotAL research
project (high temperature-optimized AL-bond technique for offshore appli- cations), Rehm has developed a sys- tem with inert gas operation that allows temperatures to reach up to 300°C (572°F). The system guarantees
low residual oxygen levels of 30 ppm
O2, and its cycle time can be controlled from a minimum of 3 minutes to a maximum of 24 hours. The HotAL project was funded by BMBF (German Federal Ministry for Education and Research) and conducted under the project coordination of the Fraunhofer IZM in Berlin (Fraunhofer Institute
for Reliability and Microintegration) and industrial partners that include Heraeus, Semikron, and F&K Del - votec Bond technik. The magazine dryer is suitable for use in the thermal treatment of semiconductor applica- tions, hy brid construction and elec- tronic components that must be trans- ported in magazines. Contact: Rehm Thermal
Systems, LLC, 3080 Northfield Place, Suite 109, Roswell, GA 30076 % 770-442-8913 fax: 770-442-8914 E-mail:
p.handler@rehm-group.com Web:
www.rehm-group.com r
See at NEPCON China, Booth 1E50 and
Protecto selective conformal coating system.
SMT Hybrid Packaging, Booth 7-451
Page 87
FREE
Securo Plus and Minus hot and cold function test systems.
completely new series of test sys- tems: the Securo Minus for cold func- tion tests, and the Securo Plus for hot function tests. To check, for example, the winter performance of sensitive electronics, the components in the Securo Minus system can be fed with cold air or nitrogen at tem- peratures down to –55°C (–67°F). The systems can also be combined with other measurement equipment.
When Lightning Strikes Keeping Aircraft Flying
Continued from page 79
joints against the manufacturing spec- ifications through the service life of the product. The BLRT accomplishes this by providing a traceable, recorded history of measurements taken at var- ious times, and providing these values as points of comparison for evaluation. With today’s aircraft having much longer service lives than their prede- cessors, this through-life traceability and monitoring is an important factor in the management of continued air- worthiness. A typical single-aisle aircraft
requires around 800 bonding measure- ments in each wing. A typical aircraft engine requires around 400. The total number of tests per aircraft runs into thousands. Using a computer-con- trolled automatic system for both man- ufacture and maintenance, reporting accurate and repeatable results, ensures that every bond, loop and joint will perform when lightning does strike. Contact: MK Test Systems, 22102
Pepper Road, Suite 116, Lake Barrington, IL 60010 % 773-696-1060 Web:
www.mktest.com r
METCAL SOLDERING SYSTEM WHEN YOU PURCHASE A FUME EXTRACTION SYSTEM
FREE Offer From Metcal Purchase our two-operator BVX-201-KIT1 Fume Extraction System and choose one of three MFR-1100 Soldering Stations For FREE!
FREE Off
FREE Offer From Metcal me
Choose Which System You Want When You Order Your Fume Extraction System (Up To a $368.00 Value):
MFR-1160 Single Output SSC Cartridge Soldering System
Promo Code P2-BVX Available From Authorized Metcal Distributors Worldwide Offer Ends June 30, 2016
de
raction e):
MFR-1110 Single Output Cartridge Soldering System MFR-1120 Single Output Tip Soldering System
ering System System
www.metcal.com
See at NEPCON China, Booth 1E52 and SMT Hybrid Packaging, Booth 7-109
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120