May, 2016 Pushbutton Switch
Beaverton, OR — Phaseda LLC, a manufacturer of electro-mechanical
series of metal pushbutton switches. IP67-rated, these switches are suit- able for outdoor applications includ- ing farm machinery, ATVs and marine equipment. The switches can be assembled
easily into panel holes with sizes of 16, 19, 25, and 30mm (0.63, 0.75, 0.98, and 1.18in). Functions include SP and DP with momentary or maintained position. The buttons can be illumi- nated by a center dot or circle ring with LEDs in various colors, which include white, green, blue, red, and
Sealed, illuminated pushbutton switches.
switches for power control and board- level applications, has released a
orange for different voltage loading. Contact: Phaseda LLC, 16335
SW Snowy Owl Lane, Beaverton, OR 97007 % 503-564-4647 E-mail:
sales@phaseda.com Web:
www.phaseda.com
Milwaukee, WI —PFERD has intro- duced its Cast Cut, a line of high-per- formance carbide burrs designed especially for use with cast iron. The
PFERD Intros Cast Cut Carbide Burr
PROTECT YOUR IC PACKAGES FROM
HUMIDITY PROBLEMS GLOBAL DRY STORAGE LEADER FOR ELECTRONICS COMPETITIVE PRICING!
CONFORMS TO IPC/JEDEC J-STD-033C & IPC-1601
ULTRA-LOW HUMIDITY STORAGE 1%RH
Phaseda Releases Anti-Vandal
www.us-
tech.com
Page 109
100 percent higher than conventional double-cut burrs, due to its tooth geometry, which presents a significant benefit for automotive customers. Other markets include foundry, weld- ing and general industrial use. The burrs have been created for
PFE-101 Cast Cut burr.
burrs have a high stock removal rate and a smooth milling action, which reduces noise and vibration. According to the company, Cast Cut achieves stock removal rates up to
coarse stock removal on all types of black, grey and white cast iron. With cutting speeds in a range of 1,500 to 2,500sfm (rotational speed of 12,000 to 20,000rpm), they have an aggres- sive cutting action that removes large chips. The burrs are available in five standard SCTI shapes with a
shank diameter of 0.25in (6.35mm). Contact: PFERD, Inc., 9201 W.
Heather Avenue, Milwaukee, WI 53224 % 262-255-3200 fax: 262-255- 2840 E-mail:
sales@pferdusa.com Web:
www.pferdusa.com
NK Technologies: Secondary Current Transformer
San Jose, CA — NK Technologies has added the CT-MS to its line of 5A sec- ondary current transformers. The transformer has a split-core design and a large sensing window, which makes it useful for installation over
dard power monitors and panel meters built for 5A input. With durable, plated terminals,
the transformer can measure current from 0 to 150 and 0 to 800A. Its sens- ing window is 2.22 x 1.19in (56.4 x
DXU 1001 DXU-1001
SEIKA MACHINERY, INC. HEADQUARTERS: 3528 TORRANCE BLVD., SUITE 100 TORRANCE, CA 90503 PHONE: (310) 540-7310 FAX: (310) 540-7930 E-MAIL:
INFO@SEIKAUSA.COM
Split-core secondary current transformers.
wires or bus bars. The CT-MS meas- ures AC current and produces a 0 to 5A output proportional to the current flowing through its sensing window. The transformer has been
designed to offer a compact and cost- effective way to measure primary current. It is compatible with stan-
30.2mm) in size. Also, the device meets ANSI/IEEE C57.13 and IEEE
C57.13.2 standards. Contact: NK Technologies, 3511
Charter Park Drive, San Jose, CA 95136 800-959-4014 E-mail:
sales@nktechnologies.com Web:
www.nktechnologies.com
WWW.MCDRY.EU
HELTORFER STRASSE 16, D-40472 DÜSELDORF PHONE: 0211-4158-0 FAX: 0211-4791428 E-MAIL:
INFO@SEIKA-GERMANY.COM
DXU 1002
WWW.MCDRY.US NORTH AMERICAN AGENT:
ATLANTA OFFICE: 1580 BOGGS ROAD #900 DULUTH, GA 30096 PHONE: (770) 446-3116 FAX: (770) 446-3118
EUROPEAN AGENT: DXU-1002 DXU U-580 FEEDER CABINET DXU U-580AF FEEDER CABINET
MCU-201
MCU-301
MCU-401
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108 |
Page 109 |
Page 110 |
Page 111 |
Page 112 |
Page 113 |
Page 114 |
Page 115 |
Page 116 |
Page 117 |
Page 118 |
Page 119 |
Page 120