40 Sunday 09.09.2012


theibcdaily More power for accessories PAG By David Fox


The new PAGlink PowerHub allows users to provide constant power to up to four 12v camera accessories from


individual or linked PAGlink batteries.


The ultra-slim, lightweight accessory power unit is designed to be sandwiched between two PAGlink batteries, allowing users to hot-swap the rear battery


without losing power. It can also be used on the rear of an individual PAGlink battery, although the key advantage of the PAGlink system is that allows two or more V-Mount Li-Ion batteries to be linked for charge or discharge, to


greatly extend run-time, or offer a high-load capability of 12A for power-hungry cameras and accessories. PowerHub features a choice of D-Tap, PP90 or Hirose plug-in outputs that can be positioned on either


Minimize complexity, maximize availability. Headends from Rohde & Schwarz.


The compact ¸AVHE100 is setting new standards for audio/video headends. It is based on professional IT hardware, and the entire range of functions has been implemented using an innovative software architecture. The integrated headend management system supports touchscreens for intuitive operation of the ¸AVHE100. Special CrossFlowIP technology developed by Rohde & Schwarz maximizes system availability. The ¸AVHE100 keeps you on air 24/7.


See for yourself by visiting www.rohde-schwarz.com/ad/avhe100


The PAGlink PowerHub takes four D-Tap, PP90, Hirose or USB plug-in options


side of the unit, in any combination, allowing users to customise the PowerHub to their particular requirements. A USB output is also available for charging a smartphone. 11.E20


Please visit us in hall 8, booth D35.


Now we CAN Motor


Betz-tools By David Fox


The new BTM CAN Motor from Betz-tools is designed to work with 3D rigs and remote heads (such as the company’s new Piano remote heads). It has an integrated power amplifier controlled via CAN-Bus and can be configured for focus, iris or zoom. Its variable-height mounting bracket fits 15mm and 19mm standard support rods, with no tools or brackets required. It comes with snap-on lens gear modules (0.4 Fujinon iris – 0.5 Canon/Angenieux – 0.6 Fujinon focus – 0.8 film and HD) that can be mounted on either side of the motor. 11.F30


¸AVHE100


Betz-tools’ BTM CAN Motor with interchangeable lens gear modules


Page 1  |  Page 2  |  Page 3  |  Page 4  |  Page 5  |  Page 6  |  Page 7  |  Page 8  |  Page 9  |  Page 10  |  Page 11  |  Page 12  |  Page 13  |  Page 14  |  Page 15  |  Page 16  |  Page 17  |  Page 18  |  Page 19  |  Page 20  |  Page 21  |  Page 22  |  Page 23  |  Page 24  |  Page 25  |  Page 26  |  Page 27  |  Page 28  |  Page 29  |  Page 30  |  Page 31  |  Page 32  |  Page 33  |  Page 34  |  Page 35  |  Page 36  |  Page 37  |  Page 38  |  Page 39  |  Page 40  |  Page 41  |  Page 42  |  Page 43  |  Page 44  |  Page 45  |  Page 46  |  Page 47  |  Page 48  |  Page 49  |  Page 50  |  Page 51  |  Page 52  |  Page 53  |  Page 54  |  Page 55  |  Page 56  |  Page 57  |  Page 58  |  Page 59  |  Page 60  |  Page 61  |  Page 62  |  Page 63  |  Page 64  |  Page 65  |  Page 66  |  Page 67  |  Page 68  |  Page 69  |  Page 70  |  Page 71  |  Page 72  |  Page 73  |  Page 74  |  Page 75  |  Page 76  |  Page 77  |  Page 78  |  Page 79  |  Page 80  |  Page 81  |  Page 82  |  Page 83  |  Page 84  |  Page 85  |  Page 86  |  Page 87  |  Page 88  |  Page 89  |  Page 90  |  Page 91  |  Page 92  |  Page 93  |  Page 94  |  Page 95  |  Page 96