October, 2016
www.us-tech.com
Newark, DE — W. L. Gore & Asso - ciates, Inc. has successfully integrated its GORE® Aerospace Ether net Cables into upcoming F-16 upgrade initiatives. The company’s new 10 Gbit cables exceed Cat6a electrical requirements by delivering reliable signal integrity with sufficient margin for high-speed data transmission over longer distances. These cables are qualified according to C21091 specifi- cations for F-16 upgrades that require exceptional electrical and mechanical performance in harsh aerospace envi- ronments. In addition, the cables can be
easily retrofitted into existing air- craft structures, making them an excellent solution for the F-16. They are significantly smaller, lighter weight and more flexible with a tighter bend radius for easier routing in tight areas when compared with leading alternative cables. The indi- vidually-shielded pairs in the new cables also provide enhanced electri- cal performance with lower signal
Moticont: Hi-Precision Brushless
Linear Motors Van Nuys, CA — The off-the-shelf LBIM-021 series of linear three- phase brushless servo motors from Moticont have been designed to fit a broad range of linear motion applica- tions. The low-cost, compact linear motors offer high acceleration, accu- racy, repeatability, and precision to less than 1µ.
Ethernet upgrade cable.
Page 93 Gore Ethernet Cables Used in F-16 Aircraft Upgrades
attenuation and minimal crosstalk to ensure reliable system performance over the life of the aircraft. When upgrading any aircraft,
proper connector-cable termination practices are crucial to ensure com- plete and accurate high-speed data transfer. Gore made it easy by devel- oping step-by-step instructions for terminating its Cat6a cables with leading high-speed aerospace connec- tors successfully in less time with lower risk, which helps reduce down-
time and costly delays. Contact: W. L. Gore &
Associates, Inc., 555 Paper Mill
Road, Newark, DE 19711 % 888-914-4673 Web:
www.gore.com
Organize and take control of your documents
Linear brushless servo motor. The series contains four sizes of
forcers (the moving part of a linear motor) and matching magnetic tracks that create forces of 8.7, 16.3, 23.1, and 31.0 lb (38.7, 72.4, 102.9, and 138.1N) at 10 percent duty cycle. The lightweight forcers are built without iron to provide high acceler- ation with low inertia, and cog-free motion. The motors are suitable for a variety of medical, manufacturing, scanning, inspection, laser cutting, and precision assembly applications. The clean, non-commutated,
quiet motors are integrated easily into both new and existing applications. Modular magnetic tracks, available in four standard and custom lengths, can be assembled to create unlimited stroke lengths, and multiple forcers can operate in the same magnetic track with overlapping travels. The motors can be commutated
in trapezoidal or sinusoidal mode, and can be ordered as complete plug- and-play systems, including position sensors, controllers, amplifiers, and power supplies. The company also offers a variety of linear motor sizes
and custom designs. Contact: Moticont, 6901
Woodley Avenue, Van Nuys, CA 91406 % 818-785-1800 E-mail:
moticont@moticont.com Web:
www.moticont.com
YUDU’s mobile Document Center App can provide employees and customers with a single destination from which to access brochures and catalogs to user manuals and datasheets.
Can sit across iOS, Android and Windows devices for full platform ubiquity
Properly categorize all of your content, from brochures and catalogs to user manuals.
Tight version control, so that older documentation is never presented to users of the app.
Provide a truly responsive, smartphone friendly viewing mode for smartphone users, called PhoneView.
Permission management to make sure you can control
who sees what documents. For more information
888 367 9838
Enhanced search options for easy discoverability among readers.
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100