October, 2016
www.us-tech.com
CDE Expands Line of Sealed Electrolytic Capacitors
Liberty, SC — Cornell Dubilier Electronics (CDE) has released significantly higher voltage values for its MLSH Slimpack series of hermetically-sealed aluminum electrolytic capacitors. These special com- ponents incorporate a true glass-to-metal seal that prevents dry-out of the capacitor electrolyte. As a result, they provide extraordinarily long life (5,000 hours) to meet the most demanding applications for military and aerospace. With this line expansion, the capacitors are now available in nine values, from 120 to 3,200 µF, with ratings up to 250 VDC. According to the company, the hermetic
Slimpack is an offshoot of the well-established non-hermetic Flatpack series. The new MLSH Slimpack can be used as a replacement for parallel and series banks of wet tantalum capacitors for both new and existing designs. This change is especially beneficial for bulk storage. The devices measure 1.0 x 1.5 x 0.5 in. (25.4 x 38.1 x 12.7 mm), weigh
Magid:
Breathable and Flame Resistant Welding Jacket
Romeoville, IL — Personal protective equipment manufacturer Magid, has expanded its clothing line to include a flame-resistant welding jacket. The Magid® FR welding jacket has ANSI Cut Level 4 sleeves and a breathable
Sealed high-capacity electrolytic capacitors.
less and have more capacitance than a parallel bank of three or more wet tantalum capacitors. This high- rated capacitance is maintained at temperatures as low as –55°C (–67°F), a key requirement for power supplies used in military and aerospace applications. Top-end temperature rating is +125°C (+257°F). All devices in the series are housed in rugged stainless steel cases with a vibration rating of 80g. In most applications there are significant cost and space savings vs. a comparably-rated bank of wet
tantalum capacitors. Contact: Cornell Dubilier Electronics, Inc.,
140 Technology Place, Liberty, SC 29657 % 864-843-2626 fax: 864-843-2402 Web:
www.cde.com
Page 89
Flame-retardant welding jacket.
FR mesh back panel to help prevent heat exhaustion. The FR mesh mate- rial provides protection while allow- ing body heat to escape so workers stay cool; however, it is not recom- mended for overhead welding or other applications where sparks and slag could get trapped in flame resistant mesh material. According to the company, the
new welding jacket has caught the attention of safety professionals because it solves the problem of pro- tecting workers while keeping them comfortable so that their work is not compromised or interrupted. Features of the welding jacket
include a flame-resistant mesh back panel, Aramax® fabric sleeves for heat resistance and ANSI Cut Level 4 protection, para-aramid knit cuffs for a snug fit with thumb holes to prevent the sleeves from riding up the arm, leather reinforced enclosed metal snap closures on front placket
for enhanced durability. Contact: Magid, 1300 Naperville
Drive, Romeoville, IL 60446 % 773-289-1385 fax: 773-384-6677 Web:
www.magidglove.com
1 2 9:15 AM
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100