Page 74
www.us-tech.com
October, 2016
Ironwood Introduces 98 Pin BGA Socket
Eagan, MN — Ironwood Electronics has introduced a high-performance BGA socket for 0.5 mm (0.02 in.) pitch BGA 98 pin ICs. The SG-BGA- 7295 socket has been designed for IDT’s flip-chip chip-scale package (FCCSP) and operates at bandwidths up to 30 GHz with less than 1 dB of insertion loss. The sockets are
to be placed very close to the device for impedance tuning. The socket also incorporates a simple hardware installation method so that ICs can be changed out quickly. The sockets are constructed
with high-performance and low- inductance elastomer contactors and operate in a temperature range of
BGA socket for 98 pin ICs.
designed to dissipate up to several watts without extra heat sinking and can handle up to 100 watts with a custom heat sink. The contact resist- ance is typically 20 mW per pin and connects all pins with 30 GHz band- width on all connections. The socket is mounted using
supplied hardware on a PCB with no soldering, and has a small footprint. The small footprint allows inductors, resistors and decoupling capacitors
–35 to +100°C (–31 to +212°F). The pins have a self inductance of 0.15 nH and mutual inductance of 0.025 nH. Capacitance to ground is 0.01
pF. Current capacity is 2A per pin. Contact: Ironwood Electronics,
1335 Eagandale Court, Eagan, MN 55121 % 952-229-8200 E-mail:
info@ironwoodelectronics.com Web:
www.ironwoodelectronics.com
See at electronica, Hall A6 Booth A01
Test for gross and fine leaks in as little as 6 minutes.*
Only NorCom optical leak technology detects both gross and fine leaks in hermetically sealed packages, this fast. Instead of using multiple technologies
CAPABILITIES
Proof of Concept Quick Turn
Consignment / Turnkey 30 Years of Industry Experience
SERVICES
Proof of Concept NPI
Material Procurement
and processes, you can leak test virtually any type of package with one high-speed system. The NorCom 2020™
24-48 SHIPS IN SHIPS IN HOURS If you need it fast, call Ninja! series inspects hermetically sealed components to
MIL-STD 883 requirements either in seam seal trays, or when already mounted to circuits boards and assemblies. It automatically rejects failed devices, and reports the leak rate for each part, eliminating “divide and conquer”leak testing.
NorCom 2020™
Try it free. Send us your package samples today, for a leak test evaluation and report at no charge. *Note: Test time is dependent on package volume
www.norcomsystemsinc.com
610-592-0167 1055West Germantown Pike Norristown, PA 19403 USA
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100