October, 2016
www.us-tech.com
Rohde & Schwarz Supports LoRa Product Testing
Columbia, MD — Rohde & Schwarz, a member of the LoRa Alliance, now supports the testing of LoRa devices and components. LoRa® is a low power wide area network (LPWAN) specification intended for wireless battery operated devices in regional, national and global networks. LoRa devices are well-suited for low energy, robust com- munications and use spread spectrum modulation (similar to M-ary FSK) to make them less sensitive to interference. By adjusting the spreading factor, LoRa designs can be optimized for higher data rates or greater sensitivity. The company offers a suite of products that
are useful for LoRa RF transmitter and receiver testing. The R&S FSW signal and spectrum ana- lyzer provides excellent phase noise performance, while the R&S SMW200A vector sig-
Sonics & Materials Debuts
nal generator creates complex, high-quality, digi- tally modulated signals, which are required for early-stage LoRa device development. For manufacturing environments where speed, performance and cost are important factors,
the R&S NRP family of power sensors offers a low- cost solution to measure output power with speed and accuracy as a standalone sensor or as part of a production test system. The R&S FPS series of spectrum analyzers is fast, compact and can be used for frequency and power measurements. In addition, the spectrum analyzers are only 2U high, reducing required rack space by 50 percent when
compared with more costly solutions. Contact: Rohde & Schwarz USA, Inc., 6821
Benjamin Franklin Drive, Columbia, MD 21046 % 410-910-7800 fax: 410-910-7801
Signal and spectrum analyzer (top) and vector signal generator (bottom).
E-mail:
info@rsa.rohde-schwarz.com Web:
www.rohde-schwarz.com
See at electronica, Hall A1 Booth 307 TAKAYA The Flying Probe Experts TAKAYA set a NEW standard in high performance and overall test
coverage with the introduction of its Advanced Multi-Function Flying Probe Systems, the APT-1400F and the NEW APT-1400F-SL
Ultrasonic Welder
Newtown, CT — Sonics & Materials has introduced its new e-Press Touch ultrasonic stepper motor welder. The unit is operated by a touchscreen and has a single streamlined box that contains both its controller and power supply. The GXP e-Press Touch consists
of an electric stepper motor press with an optical encoder for precise, repeat- able welds. The touch panel has dynamic, full-colored menus designed for easy weld control, monitoring and networking. Virtual network comput- ing (VNC) for PCs and tablets is pro- vided, along with user-friendly naviga- tion and an intuitive command flow. Features of the system include
graph plotting (power/time and force/time), Ethernet IP and USB
Unprecedented Test Speed and Accuracy at the Probe Tip Architecture provides fastest and most controlled probe movement
6 Topside Flying Probes Provide Optimum Access Flexibility Four angled probes, two vertical probes (no angle)
LED Color Test Option Allows functional testing of LED “Color & Luminance”
New TOS-7F Color Camera & Vision system for AOI New high intensity dual LED light ring provides direct camera lighting
Standard Intergrated Functional Test Capability Newly designed high measurement unit Integrated 4 quadrant power supplies Frequency Measurement Capability
Programmable Function generator - Sine wave, Square wave, etc.
APT-1400F / APT-1400F-SL Multi-function Flying Probe Systems
e-Press Touch ultrasonic stepper motor welder.
upload, trend capture with virtually unlimited storage referenced by date or cycle, trend plotting, weld to peak power, a weld set up wizard with handy calculation pop-up screens, and event logging that can be uploaded by the user. The system is available in 20,
30 and 40 kHz frequency models and is built around an FEA-designed sin- gle piece rigid cast aluminum mach - ine frame with an inline load cell for precise force triggering and a linear
ball screen actuator. Contact: Sonics & Materials,
Inc., 53 Church Hill Road, Newtown, CT 06470 % 203-270-4600 E-mail:
info@sonics.com Web:
www.sonics.com
See at The ASSEMBLY Show, Booth 1338
TEXMAC, Inc.
3001 Stafford Drive. Charlotte, NC. 28208 Ph: 704-394-0314
www.texmac.com
TAKAYA
Page 77
NEW!
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100