August, 2019
Watsonville, CA — Applied Motion Products has introduced two new NEMA 24 frame integrated motors with dual-port communications for connecting to
the industrial
Ethernet/IP network of a plant or machine. By incorporating two M12 Ethernet/IP connectors, instead of only one on each axis, the SWM24IP- 3DE integrated stepper motor and TXM24IP-IDG StepSERVO™ inte- grated motor support more efficient network topologies, such as line net- works and daisy-chain connections. Ethernet/IP network communi-
cations are the widely used industri- al protocol
for manufacturing
automation applications. With Ethernet/IP, users can control, con- figure and query a drive using an open, standards-based, industrial Ethernet connection at speeds up to 100 Mb/sec. All drive and motor fea- tures are accessible over the Ethernet/IP network, including more than 100 commands and 130 regis- ters for controlling motion, I/O, con- figuration, polling, math, register manipulation, and Q programming. The additional Ethernet/IP
communications port on the motors allows for cost savings and design simplification by reducing cables, eliminating bulky cable trays and downsizing network switches. For example, in a star network, every single motor must connect to the cen- tral switch on a dedicated cable. In a line network using motors
Richardson RFPD Offers Power Integrations Gate Driver
Geneva, IL — Richardson RFPD is now offering a new gate driver IC from Power Integrations, as well as full design support capabilities. The SIC1182K SCALE-iDriver™
is a high-reliability, single-channel sil- icon carbide (SiC) MOSFET gate driv- er designed to deliver industry-leading peak-output gate current without an external boost stage. The new device is available in an eSOP-R16B package. Reinforced galvanic isolation is provid- ed by Power Integrations’ robust solid insulator FluxLink™ technology. Up
www.us-
tech.com
with dual-port communications, only the closest motor connects to the switch with the rest connecting to each other in a daisy-chain configu- ration. In addition to shortening cable runs between motors, only one port is needed for the entire network, which means a smaller Ethernet switch. The
SWM24IP-3DE and
TXM24IP-1DG integrated motors are IP65 rated for use in splash-zone and dirty environments. Each motor has a NEMA 24 mounting flange, which has the same mounting dimensions as a NEMA 23 motor but with a larger shaft to accommodate a higher torque output. Both motors include a built-in encoder for enhanced positioning
Page 83 Applied Motion Products Intros NEMA 24 Motors
capabilities. The SWM24IP-3DE can perform stall detection and stall pre- vention functions for more reliable and accurate performance than an open-loop motor in a broader range of applications. The TXM24IP-1DG utilizes
Applied Motion’s StepSERVO closed- loop stepper technology to greatly improve the performance of the step motor with greater acceleration, increased efficiency, and increased accuracy, as well as decreased motor
heating and noise. Contact: Applied Motion
Products, 404 Westridge Drive,
NEMA 24 frame integrated motor with dual-port communications.
Watsonville, CA 95076 % 800-525-1609 E-mail:
erice@applied-motion.com Web:
www.applied-motion.com
The 52nd International Symposium on Microelectronics is being organized by the International Microelectronics Assembly and Packaging Society (IMAPS). The program features over 130 original papers presented on technologies throughout the entire microelectronics/packaging supply chain. The Symposium will feature 5 technical tracks, plus our interactive poster session, industry panel, networking opportunities, and a tour that span the three days of sessions on:
SIC1182K SCALE-iDriver gate driver IC.
to ±8A peak output drive current enables the product to drive devices with nominal currents of up to 600A (typical). The SIC1182K is suitable for
several key industrial applications, including general-purpose and servo drives, UPS, PV, welding inverters,
and power supplies. Contact: Richardson RFPD,
1950 S. Batavia Avenue, Suite 100, Geneva, IL 60134 % 630-262-6836 E-mail:
cspears@richardsonrfpd.com Web:
www.richardsonrfpd.com
TRACK 1: SiP/SiM (System Solutions) TRACK 2: Wafer Level/Panel Level (Advanced RDL) TRACK 3: High Performance/High Reliability TRACK 4: Flip Chip/2.5D/3D/Optical (Advanced Package) TRACK 5: Additive Manufacturing and Enabling Technologies
Full technical program and conference information available at
www.imaps2019.org
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88
