This series has a hermetic seal and an external adjustment in the rear of the case. As with other Ashcroft® industrial bimetal thermometers, it has a Maxivision®
dial
which eliminates parallax by placing the pointer on the same plane as the graduations. The connection locations are rear, lower, and Everyangle™.
Features
• Hermetically sealed • External adjustment
table 1 table 2 table 3 table 4 table 5 table 6 table 7 BuiLD a part nuMBer
XX XX XX
table 1 20 30 50
table 2 EI
table 3 40 50 60 42 60
table 4 R E L
table 5 025 040 060 090 120 150 180 240
X XXX X/XXX
case size 2˝ 3˝ 5˝
style EI
stem connection Plain
Pointed Plain 1⁄4 NPT
1⁄2 NPT Union 1⁄2 NPT
stem Location Rear
Everyangle Lower
stem Length (inches) 21⁄2 4 6 9
12 15 18 24
XXX table 6
–20/120†† 30/130†† 0/200 0/250
50/300 50/400 50/550
200/700† 100/800†
temperature range
°F* Fahrenheit °/Div. Fig. inter. –80/120
2
1 2 2 2 5 5 5
20
–20/120 10 20 50 50 50 50 50
10 100 200/1000**† 10 100
* Dual scale ranges available for all standard °F ranges (3˝ and 5˝ case only) ** Satisfactory for continuous service up to 800°F or 425°C. Can be used for intermittent service from 800 to 1000°F, or 425 to 500°C. Use Ashcroft Duratemp® above.
† Minimum stem length for these ranges is 4˝.
†† Minimum stem length for lower connection and Everyangle is 4˝. table 7