Thermometers/Temperature • Temperature Transmitters
TC Input Isolating Signal Conditioner WV428
Users can now have significant labor savings over traditional protection methods because there is no need for explosion proof enclosures and conduits.
A Class I hazardous location is one in which flammable gases or vapors may be present in the air to be ignitable or explosive. (Typical applications include petroleum refineries, spray finishing areas, utility gas plants and fuel servicing areas.)
A Division 2 area is one where the flammable gases or vapors are normally not present in an explosive concentration, but could accidentally exist. Group A is Acetylene, Group B includes Hydrogen, Group C includes Ether and Group D includes Hydrocarbons, fuels and solvents.
• Lower Power Requirements with Smart Power Control • Improved Accuracy
• Optional E-mail Notification of Alarms • DIP Switch Configuration
item WV428-2000 Descriptions Input Isolating Signal Conditioner
WV905 H910 H915 MB03 C650
Descriptions Communications Interface
TS35 x 7.5 DIN Rail (2 meters) 24VDC Power Supply (0.5 Amp) 24VDC Power Supply (1 Amp) 24VDC Power Supply (2.3 Amp) End Bracket for MD03