Non-Spring Return Direct Coupled Globe Valve Actuators for Higher Torque Applications
Models ML6421; ML7421 FEATURES
• Easy and quick installation on valves with 1 3/8” bonnet and 3/4” stroke, or with 1 7/8” bonnet and 1 1/2” stroke.
DESCRIPTION
Direct Coupled Globe Valve Actuators mount directly on V5011 and V5013 steam and water globe valves without a linkage. These Non-Spring Return Actuators will operate 1/2 to 6 in. valves.
Screw terminals Power Consumption (Driving) 11 VA 11 VA 12 VA 12 VA
Supply Voltage Number of Internal Auxiliary Switch
24 Vac +10%, -30%
24 Vac +10%, -15%
24 Vac +10%, -15%
24 Vac +10%, -15%
0 0 0 0 Stroke Used With (inch) (mm) 3/4 in. 20 mm — 1 1/2 in. 38 mm V5011 and V5013 3/4 in. 20 mm V5011 and V5013 1 1/2 in. 38 mm V5011 and V5013 Industrial Controls • www.indcontrols.com • 800-423-3960 1017 Valve
Stays in place 405 lbf (1800 N)
Two knockout holes for 1/2 in. conduit standard on actuator case Class I Insulation (24 Vac) Screw terminals 60 Hz None
Directly on V5011/V5013 Globe Valves and VGF Flanged Globe Valves (1-1/2” or 38mm stroke) ABS Plastic IP54
5 to 95% RH
14 F to 122 F (-10 C to +50 C) -40 F to +158 F (-40 C to +70 C) 5.1 lb (2.3 kg)
• High force for VGF Pressure-balanced valves. • No separate linkage required. • Conduit connector standard. • No adjustments required on linkage. • Accurate valve positioning. • Low power consumption. • High close-off ratings. • Force limiting end switches.