Actuator with ball joint to accept 5/16 in. push rod. Actuator with 1/2 in. shaft linkage and bracket. Actuator with ball joint to accept 5/16 in. push rod. Actuator with complete linkage for 1/2 in. damper shafts. Actuator.
item Wholesale Model no spring range psig Mounting 8 to 13
M556-1402 M556-51
M556-5101 M556-5102 Specifications
construction Housing
Diaphragm Shaft
Spring
Ambient temperature limits Supply air pressure Nominal
Maximum
Air consumption (positioner models) adjustments
Hesitation stroke start point Finish stroke start point Connections
Dimensions M556 Series M573 Series M574 Series
Glass-filled nylon. Neoprene, rolling type.
Stainless Steel on M556, M573, M574. Nickel plated steel on M572, M583, M584. Retract actuator shaft on loss of air pressure. -20 to 180°F (-29 to 82°C). Clean, dry, oil free air required.
20 psig (138 kPa). [M580 Series nominal 0 to 15 psig (0 to 103 kPa).] 30 psig (207 kPa). 0.017 scfm.
4 psig (28 kPa); stroke adjustable 20% to 70% prior to 4 psig (M58X only). 8 psig (55 kPa); stroke adjustable 80% to 30% after 8 psig (M58X only). Barbed fitting for 1/4 in. O.D. plastic tubing.
5-3/4 dia. x 17 L in. (146 x 432 mm). 3-3/4 dia. x 14 L in. (95 x 356 mm). 4-5/8 dia. x 15-1/8 L in. (117 x 384 mm).