The Solid State Ultraviolet Flame Detectors detect the ultraviolet radiation emitted by combustion flames. The flame detectors are used with Honeywell flame safeguard controls to provide flame supervision for gas, oil, or combination gas-oil burners.
• Properly installed, the flame detectors are pressure rated for 5 psi
• Flame detector is used with only the R7851B Flame Amplifier and the 7800 SERIES controls • Integral collar threaded (internal 1/2-14 NPSM) for mounting on a one-half inch sight pipe
Item C7927A1016 Descriptions Ultraviolet Flame Detector Comments Detects ultraviolet radiation in flames used With Flame Amplifiers: R7851B
Visible Light Oil Flame Detector Model C7962
The C7962B Visible Light Flame Detector detects the visible light emitted by fuel oil combustion flames. The C7962B Detector is used with Honeywell Flame Safeguard controls to provide fuel oil flame supervision in commercial and industrial burners
• Used with 7800 SERIES Flame Safeguard controls • Used with R7851B Flame Amplifier
• Has an integral collar threaded (internal 1/2-14 NPSM) for mounting on 1/2 inch sight pipe
Solid State Flame Detector to Site Visible Light of an Oil flame Solid State Flame Detector to Site Visible Light of an Oil flame
32007439-001 Mounting Bracket and screws
Call us for product sizing and selection assistance.