March, 2015 Collapsible Coil
Syracuse, NY — The Eraser Company, Inc. offers coil winders in a range of sizes to accommodate a vari- ety of material types and sizes. These
Winders from Eraser Model CW10 is a Small Winder, Collapsible coil winder.
collapsible reelers are used for pro- ducing neat coils of material, or may also be used for de-reeling materials supplied in hanks or coils. The col- lapsible feature makes it easy to remove a coil of material after it has been wound.
the CW20 is a Medium Winder, and the CW30 is a Large, Heavy-Duty Winder. Models CW10 and CW20 have an adjustable clutch arrange- ment to prevent overruns in de-reel- ing applications. These units are suitable for production kitting, elec- trical contracting, and any other function requiring long lengths of wire, cable or other flexible materi- als. The CW10 and CW20 are bench models and the CW30 is a floor model. An optional adjustable floor stand or extra bench stand are avail- able for the CW10 and CW20. Eraser’s Coil Winder Series are the suitable units to use in de-reeling, measuring, cutting and reeling oper-
ations. Contact: The Eraser Company,
Inc., P.O. Box 4961, Syracuse, NY 13221 % 800-724-0594 or 315-454-3237 fax: 315-454-3090 E-mail:
astone@eraser.com Web:
www.eraser.com
Singapore — FCI has introduced its new BarGuide™ Power Connectors, which have been developed to meet the ever evolving demands for high power distribution in high density
BarGuide Connector FCI Introduces
fit PCB tails for mounting on both circuit boards and busbars and come in vertical and right-angle designs that can provide parallel or perpen- dicular interconnections. BarGuide connectors provide a
BarGuide connectors.
packaging. They are used to provide high amperage connections between busbars and circuit boards. BarGuide connectors provide a
current-carrying capability from 60 to 250Amps, based on specific pins size. They are available with press-
high current, low power loss intercon- nection with a quick connect/discon- nect function for space constrained board to board, board to busbar, and busbar to busbar power distribution applications. These connectors use a high performance spring which pro- vides a large surface contact area, thus ensuring small voltage loss, min- imum heat generation, and low inser- tion and extraction forces. FCI’s pro- prietary AGT™ plating technology adds an additional benefit to cus- tomers by providing maximum con-
ductivity and long-term reliability. Contact: FCI USA, LLC, 825
Old Trail, Etters, PA 17319 % 800-237-2374 fax: 717-938-7527
E-mail:
technicalservices@fci.com Web:
www.fci.com
Alpha and Omega Launches New EZBuck Regulator
Sunnyvale, CA — Alpha and Omega Semiconductor Limited (AOS) has
a variety of consumer electronics . The AOZ3103 is a current-mode
step-down regulator with integrated high-side and low-side NMOS switches. The device includes exter- nal compensation for added design flexibility, and to improve perform- ance in low duty cycle applications. According to the company, com-
New generation buck regulator.
released the fifth-generation EZBuck with the AOZ3103, a high efficiency, simple-to-use synchronous buck reg- ulator, with an operating input volt- age range from 4.5V to 18V and the ability to supply 3A of continuous current. The device offers a low on- resistance power stage in a thermal- ly enhanced 3 x 3mm DFN package, allowing cooler power conversion for
pared to the leading competitor, the AOZ3103’s input voltage rating is 2V higher and its feedback tolerance is 0.5 percent tighter, which allows for greater safety design margin as well as a higher degree of output voltage accu- racy. The device also has a Power-On Reset (POR), input under-voltage lock-
out and output over-voltage protection. Contact: AOS, 475 Oakmead
Pkwy., Sunnyvale, CA 94085 % 408-830-9742 fax: 408-830-9749
E-mail:
Inquiries@aosmd.com Web:
www.aosmd.com
1.0mm Pitch SMT Connector RoHS
Solving Your Board to Board Connector Design Challenges
B2B® SMT Connector
SMT Perimeter Connector
www.us-
tech.com
Page 93
800.424.9850 401.823.5200
www.advanced.com info@advanced.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104