March, 2015
www.us-
tech.com
Page 51
Stewart Connector: Small Diameter Category 6 RJ45 Plugs
Glen Rock, PA — Stewart Connector, a division of Bel Fuse Inc., (NAS- DAQ: BELFA and BELFB) has re- leased small diameter Category 6 RJ45 plugs (SS-39100-039). They are
0.160-in. (4.06mm) and copper conduc- tors with overall insulated conductor diameters of 0.025-in.
(0.64mm)
through 0.030-in. (0.76mm). Stewart Connector’s small di-
ameter CAT6 plugs notably use a proprietary contact design and wire alignment system to ensure proper cable-to-plug terminations and ro- bust connections. They are provided with a pair manager to facilitate pre- cise conductor placement, repeatable assemblies, and consistent long-last- ing patch cord performance. In addi- tion, a boot is included to provide
Small diameter Category 6 RJ45 plugs.
engineered to support Gigabit Ether- net (1000Base-T) applications. Offered to meet the requirements
of small diameter patch cables in data center environments, the 8-position, 8- wire, UTP modular plugs terminate most 4-pair, AWG 28 and AWG 30, 100W, stranded and solid unshielded twisted pair cable. Parts accommodate a maximum cable diameter up to
Sakor Intros Dynamometers For Small
Rotary Devices Okemos, MI — SAKOR Technologies, Inc. is introducing the MicroDyne se- ries of small motoring dynamometers. Suitable for a wide range of automo- tive, military and aerospace testing applications, this newest innovation is capable of testing all types of small ro- tary devices such as motors, pumps, generators, and compressors. The MicroDyne is a fully func -
tional, four-quadrant dynamometer engineered specifically for low power applications. Versions are available in sizes from 100 watts to five kilo- watts. For applications operating at five kilowatts and above, the compa- ny’s AccuDyne™ AC dynamometer system is readily compatible with larger rotary components as well as conventional engine and power-train systems, hybrid vehicle drives and electric motors. Both the AccuDyne and Micro-
Dyne offer the most precise speed and torque control available. This is especially true in low speed applica- tions where full torque can be ap- plied all the way to stall (zero speed). Today’s drive technology also allows the systems to provide seamless crossover between motoring and loading modes. Advanced features for more sophisticated testing re- quirements include inertia simula- tion, engine simulation, and NVH testing capability. The MicroDyne and AccuDyne
dynamometers, combined with an appropriate DynoLAB test cell con- trol system, will provide optimum, reliable performance in a fully auto-
mated test system. Contact: Sakor Technologies,
2855 W. Jolly Road, Okemos, MI 48864 % 517-332-7256 fax: 517-332- 7250 E-mail:
info@sakor.com Web:
www.sakor.com
1 3
IMPROVE TIME-TO-MARKET PERFORMANCE WITH OUR DEDICATED PROTOTYPE & NPI CAPABILITIES
Libra Industries efficiently transitions customers from prototype to production through our dedicated NPI and prototype group. Our engineer-managed group provides the highest quality prototypes with design feedback for manufacturability to reduce manufacturing production cost. Our flexibility and dedication to our customers’ timelines help them get their products to market faster, and makes them more competitive and profitable.
ADDITIONAL BENEFITS: Improve Your Time-to-Market Flexibility to Meet Your Materials Needs Dedicated Prototype & NPI SMT Line Unparalleled Experience Engineering Feedback Custom Process Development
Improve your time-to-market performance by choosing Libra Industries as your strategic partner to launch your next product. Our dedicated prototype and NPI capabilities are designed to get you there faster, with less downtime and wasted effort.
MANAGING YOUR PRODUCTS FROM IDEATION TO REALIZATION
LIBRA INDUSTRIES 7770 Division Drive Mentor, OH 44060 USA 440.974.7770
www.Libraind.com
bend relief at the cable exit. Optimized for use on CAT6
AWG 28 and AWG 30 patch cords, the unshielded modular plugs are en- gineered for use in data center appli- cations where the density at the rack level is high, which causes more heat to be generated by the equipment and more cooling is required to en- sure its performance. Cable bundles comprised of
AWG 28 and AWG 30 patch cords are 50 percent smaller than traditional CAT6 cables, which help facilitate improved airflow and cooling effi-
ciencies to reduce operating costs and help physically manage large numbers of cables in a limited space. Operating temperature range is
–40 to +85°C, with a durability of 750 matching cycles. Voltage rating is 150VAC, and current rating is 1.5A at 25°C. Parts are field installable with the company’s standard termi-
nation tooling. Contact: Bel Stewart Connector,
11118 Susquehanna Trail South, Glen Rock, PA 17327 % 717-235- 7512 fax: 717-235-4675 Web:
www.Belstewart.com
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104