Page 46
www.us-
tech.com Anda Intros High-Accuracy Selective Conformal Coating Nozzles
Fremont, CA — Anda Technologies is now offering a comprehensive line of five selective conformal coating noz- zles. These nozzles make it possible to apply conformal coatings with high dispensing accuracy, while pre- venting clogs. The SA-W5 selective conformal
coating spray valve is the workhorse of the Anda conformal coating noz- zles. The cone-shaped spray nozzle can coat 80 to 100 percent of circuit boards, depending on their complexi- ty. The nozzle is designed to provide
a repeatable, concentrated conformal coating film in a fine, circular pat- tern with coating widths ranging from 0.2 to 0.3 in. (4 to 8 mm). The DJ-01 needle dispense valve
is a versatile dispensing valve for sin- gle-component bead, dot, potting, con- formal coating, or encapsulation proj- ects. The DJ-01 is most commonly used in conjunction with the SA-W5 to coat complex areas of circuit boards that are hard to reach and require a high degree of accuracy. The DJ-01 ac- cepts a wide range of tips from 0.008 to
0.08 in. (0.2 to 2 mm). The DJ-03 selective conformal
coating spray valve provides a re- peatable, concentrated conformal coating film in an ultra-fine, circular pattern with coating widths ranging from 0.1 to 0.2 in. (3 to 5 mm). The LA-W30 selective confor-
mal coating spray valve is a fan- shaped spray nozzle that provides a repeatable, concentrated coating film with fan pattern widths ranging from 0.6 to 1.2 in. (15 to 30 mm). Anda’s FC-4 selective film coat-
ing nozzle combines three nozzles into a single valve. This multifunc- tional film nozzle combines film coat-
March, 2019
4 Interchangeable Lenses 1 Innovative Magnifying Lamp
Interchangeable Magnification
SA-W5 selective conformal coating spray valve.
ing, atomized spray and jet dispens- ing all rolled into one. Filming width is 0.24 to 0.6 in. (6 to 16 mm), atom- ized spray is 0.1 to 0.4 in. (3 to 10 mm) and jetting produces small dots
or fine lines. Contact: Anda Technologies
USA, Inc., 47639 Lakeview
Boulevard, Fremont, CA 94538 % 509-385-8765 fax: 844-546-3195 E-mail:
bstumm@anda.us Web:
www.anda.us
Sun Chemical Intros High Temperature Epoxy Resin
26501-LED-INX
Parsippany, NJ — Sun Chemical has launched its EPICLON® HP 4770, a multifunctional naphthalene epoxy resin for formulators and engineers in the aerospace, transportation and electronics industries who are look- ing to increase high-temperature performance. Electronic miniaturization and
(2.25x Magnification)
26501-INX-RL5D 5 Diopter Lens
26501-INX-8L5D 8 Diopter Lens (3x Magnification)
increasing requirements placed on fiber reinforced structures in the aero- space and transportation industries continue to push operating tempera- ture requirements higher. EPICLON HP 4770 offers a solution to that chal- lenge, while also providing high modu- lus/stiffness, low water absorption, im- proved mechanical properties, adhe- sion and good fiber wet out — all criti- cal factors to success in applications ranging from PCBs, encapsulants and lightweighting for aerospace to auto- motive applications. EPICLON HP 4770 is well suit-
26501-INX-RL12D 12 Diopter Lens (4x Magnification)
Email |
sales@aventools.com (4.75x Magnification)
26501-INX-RL15D 15 Diopter Lens
aventools.com
ed for prepreg manufacturing, adhe- sives, molding compounds, pultru- sion, and resin infusion and has no restrictions from important regula- tions, such as the Toxic Substances Control Act in the United States or
REACH in Europe. Contact: Sun Chemical Corp., 35
Phone | 734.973.0099
Waterview Boulevard, Parsippany, NJ 07054 % 708-236-3779 E-mail:
heather.buchholz@sunchemical.com Web:
www.sunchemical.com
Easy Lens Exchange No Tools Required!
Page 1 |
Page 2 |
Page 3 |
Page 4 |
Page 5 |
Page 6 |
Page 7 |
Page 8 |
Page 9 |
Page 10 |
Page 11 |
Page 12 |
Page 13 |
Page 14 |
Page 15 |
Page 16 |
Page 17 |
Page 18 |
Page 19 |
Page 20 |
Page 21 |
Page 22 |
Page 23 |
Page 24 |
Page 25 |
Page 26 |
Page 27 |
Page 28 |
Page 29 |
Page 30 |
Page 31 |
Page 32 |
Page 33 |
Page 34 |
Page 35 |
Page 36 |
Page 37 |
Page 38 |
Page 39 |
Page 40 |
Page 41 |
Page 42 |
Page 43 |
Page 44 |
Page 45 |
Page 46 |
Page 47 |
Page 48 |
Page 49 |
Page 50 |
Page 51 |
Page 52 |
Page 53 |
Page 54 |
Page 55 |
Page 56 |
Page 57 |
Page 58 |
Page 59 |
Page 60 |
Page 61 |
Page 62 |
Page 63 |
Page 64 |
Page 65 |
Page 66 |
Page 67 |
Page 68 |
Page 69 |
Page 70 |
Page 71 |
Page 72 |
Page 73 |
Page 74 |
Page 75 |
Page 76 |
Page 77 |
Page 78 |
Page 79 |
Page 80 |
Page 81 |
Page 82 |
Page 83 |
Page 84 |
Page 85 |
Page 86 |
Page 87 |
Page 88 |
Page 89 |
Page 90 |
Page 91 |
Page 92 |
Page 93 |
Page 94 |
Page 95 |
Page 96 |
Page 97 |
Page 98 |
Page 99 |
Page 100 |
Page 101 |
Page 102 |
Page 103 |
Page 104 |
Page 105 |
Page 106 |
Page 107 |
Page 108
